Pick the right RCM metrics for the right process

Choosing the right metrics isn’t always a cut and dried matter. As we look at RCM metrics, I am going to add another dimension to the metrics decision—that of process.

10/20/2014


Reliability-centered maintenance (RCM) has been defined in numerous ways over its evolution, from a statistics-based approach, to analyzing equipment failures, to the philosophical or stylistic, broader definition more commonly accepted today that espouses a spectrum of styles from reactive maintenance to proactive maintenance with both calendar and condition-based preventative maintenance within those bounds.

Choosing the right metrics isn’t always a cut and dried matter. As we look at RCM metrics, I am going to add another dimension to the metrics decision—that of process. 

Not all manufacturing plants are alike

Manufacturing processes are different—while automobiles and gasoline both are produced in manufacturing processes and both generally considered highly dependent on the other for their usefulness, the way you make them could not be more different. 

In addition to the vast differences in the equipment used in manufacturing in both plants, robots versus huge distillation columns, the typical refinery operates 24 hours a day every day of the year, while an automobile plant typically runs one or two shifts a day and five days a week. In this case, both the physical process variations as well as the production process variations lead to very different maintenance needs.

Process vs. Discrete approaches

In a continuous process like refining, uptime is a holy grail. If you go down for any reason, production comes to a halt and that time is non-recoverable. In situations like this, the emphasis on asset performance is centered on detecting imminent failure and preventing it. 

In failure modes and effects analysis (FMEA), you analyze how equipment might fail, what effect that failure might have, and then what steps you can take to prevent that failure from occurring. In this type of production environment, your RCM focus needs to be aligned to the uptime goal and the elements which the various FMEA activities identify as the most critical to achieving that objective. 

In a discrete manufacturing process like in an automotive or aerospace plant, there may be significant periods of time available for maintenance activity. By extending operational capacity for a few hours or days, activities might differ considerably. 

In many discrete manufacturing operations there are parallel work centers, such as a robot painting operations, where downtime in a single cell only slows but does not stop operation. In this case, there are numerous opportunities to recover the lost production through overtime or process reconfiguration. In this environment, KPIs or metrics that measure flexibility and contribute to machine center OEE and maintenance cost-effectiveness might be more relevant than in the continuous-process plant example.

-Edited by Bob Vavra, Content Manager, Plant Engineering, bvavra@cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me