Phase one: CDC Factory sets up $1M production costs savings for Pinnacle Foods


Mountain Lakes, N.J.-based Pinnacle Foods Group will use CDC Factory global manufacturing operations management (MOM) solution, offered by CDC Software , at three of Pinnacle’s largest plants in the U.S. during Phase One of the project, with an additional four plants during Phase Two.
Pinnacle plans to save $1 million in annual production costs after Phase One, and a total of $4 million annually after completion of Phase Two.
Based on a benchmark study conducted by CDC Factory consultants and the Pinnacle Foods project team, CDC Factory is expected to provide significant productivity improvements.
Pinnacle, with net sales of $1.54 billion, makes some of the most venerable brands in the U.S., including Duncan Hines baking mixes, Hungry-Man and Swanson Dinners, Mrs. Paul’s frozen foods, Vlasic pickles, and Mrs. Butterworth’s syrups.
“Our due diligence validated the out-of-the box functionality that eliminated the need for costly customizations or a time-consuming project to build an MES [manufacturing execution system],” says Tony Hipszer, CIO of Pinnacle Foods. “This project will focus on improving staff performance by using the manufacturing operations management system that CDC Factory delivers out-of-the-box. We expect this to pay off by increasing our competitive advantage through lowering production costs.
“Our executives are very experienced in the typical plant solution offerings from plant automation and OEE measurement companies,” Hipszer adds. “It was immediately apparent that CDC Factory was completely different than other solutions and offered an impressive implementation that could help us increase our profitability quickly. We believe our greatest opportunity for margin improvements is changing the way the operators and supervisors do their work.”

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me