PE study: Line workers are less committed to plant safety

While plants generally are safe, worker commitment seems to vary by job title, survey reveals

01/15/2014


The commitment to safety among plant management is high, but line workers are less likely to champion the cause of safety in manufacturing. That was the view of respondents from the recently-completed Plant Engineering study on attitudes toward workplace safety. 

New PE study reveals line workers are less committed to plant safety. Courtesy: CFE Media“That result is disturbing and calls for further examination by every plant manager in America,” said Bob Vavra, editor of Plant Engineering. “The idea that line workers even might be perceived to be less committed to safety on the plant floor is a trend we must reverse immediately. A safe manufacturing environment fulfills the promise of sending every worker home to family each night. It also preserves productivity and profitability, and those should be issues of attention for senior management and line workers alike.”

When asked who champions plant floor safety, 65% of respondents said senior management and operations management were “very committed," while only 55% of line supervisors and just 35% of line workers were seen as “very committed.” A full 20% of line workers were perceived as only “somewhat committed."

While the vast majority of personnel perceived their plants to be essentially safe, more staff in operations, maintenance, line workers and custodial staff rated their plants as “moderately safe” as opposed to “very safe." In contrast, by more than a 2-1 margin, plant management and safety executives regarded their plants as “very safe." Nonetheless, 95% of respondents said their employees feel essentially safe on the job.

“There seems to be a disconnect between the perception of safety and the reality of safety,” said Vavra. “It’s critical for each plant to re-examine their personnel’s attitude toward safety and take the necessary corrective steps to raise the confidence in their own safety efforts.

“A safe manufacturing plant is a basic tenet of Plant Engineering. It is the first criteria in selecting our Top Plant winner each year. It is the focus of one full issue each year, and is a guiding ideal behind all the articles we do,” Vavra said. “Safety is a core principle for us, and we believe it should be a core principle in every manufacturing plant.”

Other findings from the 2013 Plant Engineering Safety Study:

  • 74% of respondents said productivity increased as a result of their plants’ safety program. They also said safety efforts resulted in lower insurance costs and fewer injuries.
  • 90% of plants hold regular safety meetings, with 45% of those meetings taking place at least weekly. Daily meetings are conducted at 9% of all plants surveyed and another 13% conduct safety meetings on each shift.
  • 70% of responding plants have disciplinary programs for unsafe practices. On the other hand, 60% also have safety incentive programs designed to reward good safety practices.
  • Technology is a major factor in safety management. The survey found 81% of plants use embedded safety controls as part of their safety program, with 43% using outside training or consultants and 41% utilizing the Lean/Six Sigma strategy.
  • The barriers to safety seem to resolve around time, not money. Only 27% of respondents said the lack of funds was a problem in safety management, while 35% said training time was the issue. In a continuation of the earlier trends, 30% said that it was a lower priority among employees.
  • Plant management purchases the required personal protection equipment (PPE) in 90% of the plants. Just 35% of plants allow employees to take the PPE home. 

“We feel this is an overlooked issue for manufacturing, and one plant management can easily address,” said Vavra. “A worker injured at home misses the same amount of work time with the same loss of productivity as if he or she were hurt on the job. Studies show providing PPE for workers to use at home reduces these accidents. We think workers should be encouraged to stay safe in all aspects of their lives, and this policy is a simple, effective way to help in that effort.”

 

The study was completed in November 2013 and surveyed safety managers, plant managers, maintenance supervisors, and senior management. Almost two-thirds of respondents were involved in engineering or maintenance. Full results of the survey are now available at www.PlantEngineering.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me