Patience needed for the Chinese EV industry

China's future in the EV industry will be better served with lower and more realistic goals, as well as patience, to have a bright future going forward.

08/05/2011


The Chinese prime minister, Wen Jiabao, recently criticised the country’s slow development of its electric vehicle industry. The recent decision to incentivise only battery electric vehicles and plug-in hybrids appears to have been made in haste, China’s future direction may lie in fuel cell and hybrid vehicles as well. Wen also commented that the Chinese EV industry is still nascent – it is ‘following’  foreign companies and overly reliant on overseas international companies for components and materials. This obviously doesn't match the Chinese government's goal of making its EV industry one of the most advanced in the world.

Alongside this, several recent EV accidents in Hangzhou and Shanghai, involving the batteries on Chinese branded EVs causing fires have made it hard for me to imagine a very bright future for the Chinese EV industry in the short term. Are local Chinese suppliers really able to develop commercially and technologically successful EVs and, more importantly, do so quickly enough to make the Chinese EV industry one of the most advanced in the world?

In my opinion, there are three factors restricting EV development in China that will be difficult to overcome in the short term. First, most local EV suppliers such as Zotye and BYD, focus on the low-end of the vehicle market and consequently invest relatively little in R+D for traditional vehicles. Thus, it will be hard for them to quickly develop the more advanced technologies needed for electric vehicle design.

Second, the stereotypical image of Chinese VMs, even in China, is one of “Low-cost, low quality." Many consumers try to avoid these brands when they choose to purchase a traditional vehicle, let alone an electric vehicle. It will take time for Chinese VMs to change this perception and hence the early market opportunity for Chinese branded Evs will be quite limited.

Third, the Chinese EV industry is currently short of experienced, high quality technical experts, particularly in the area of the EV powertrain – the most complex part of the design. China (and Chinese companies) will need to invest in sending researchers to those countries which currently hold leading positions in EV technologies, such as Japan, France and Germany to learn best practice.

In summary, China would do better to lower its expectations for its EV industry. Setting some specific medium and longer term goals and working to gradually achieve these goals will bring results provided the effort and investment is carefully targeted. This new strategy will only work if specific long term attention is given to developing new technologies and improving quality. China needs patience to see a bright future for its EV industry.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me