Overcome the biggest block to communications

The plant engineering department was busy with projects. For the third day in a row, Chief Engineer Phil Walker had taken a 20-min lunch hour. The last thing he needed was another fracas involving Joe Cristy.

03/01/1999


The plant engineering department was busy with projects. For the third day in a row, Chief Engineer Phil Walker had taken a 20-min lunch hour. The last thing he needed was another fracas involving Joe Cristy.

Walker made no effort to conceal his impatience when Cristy came to him with a beef about Frank Hoe who had been assigned to work with him on a roofing estimate.

"I can't work with that guy; he's impossible."

"Stop acting like a child," Walker snapped. "There's a job to be done. Just do it."

"But -- "

"No buts. Just do the job."

The chief stomped off.

Later that day Plant Engineer George Larkin phoned Walker.

"What's happening with the roofing estimate? It's bogged down again."

Walker swore under his breath. "It's Joe Cristy; he's got some kind of a beef with Frank Hoe."

"Send him to my office," Larkin instructed.

A half hour later Walker observed Cristy and Hoe on the floor, shaking hands and grinning at each other. Soon after that, the roofing job was well under way.

Question: What would you guess Larkin told Cristy to reconcile the two men and get production moving?

Larkin's solution: Larkin summoned the chief to his office. "Psychologist Carl Rogers once said, 'The biggest block to communications is one person's failure to listen attentively, intelligently, and sympathetically to the other person.' All Cristy wanted to do was get his story across."

"What was his beef?"

"That's irrelevant. But it's the question you should have asked him when he registered his gripe. Had you just listened to him, the problem would have been resolved at the outset."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me