Outsourcing control system integration makes sense

For manufacturers putting in a new line or in need of system upgrades, there are significant time and money advantages to outsourcing system integration.

04/09/2013


Like most business leaders these days, manufacturers are tasked with doing more with less. They have become expert in producing as much final product as possible, with as little waste as possible, with as few people as possible, all the while being energy efficient and sustainable. 

That’s a pretty tall order, keeping in mind that many elements are out of engineering and operation managers’ control. Enter the system integrator.

To maintain a Lean staff, manufacturers are outsourcing some of their engineering tasks, like project management, system design and implementation to system integrators. This is especially true for small- to-mid-sized manufacturers. For manufacturers putting in a new line or in need of system upgrades, there are significant time and money advantages to outsourcing.

But how do you know when to make a direct hire or outsource? Following are two examples of projects system integrators were called upon to work on and some of the considerations that were made before deciding to outsource. 

Building materials manufacturer requires one-day cutover

A large international building materials firm produces, processes and distributes materials worldwide. Their goal was to upgrade an antiquated and unsupported Allen-Bradley PLC-2 controller with a less-antiquated (but still legacy) PLC-5, for use on an acid treat system. The project had to be fast-tracked and the cutover had a one-day window during a planned summer shutdown. The ultimate goal was to provide graphics support, alarms and better communications back to the maintenance shed, something that the PLC-2 could not do.

The company contracted system integrator Applied Sciences Group, a member of the Control System Integrators Association, to perform the conversion. ASG’s engineers were able to effectively isolate the parts of the software that were a straightforward conversion between the PLC-2 and PLC-5 hardware platforms. ASG was successfully able to develop new control algorithms for the sections of the software that were not easily converted, and they met the cutover requirement. While internal company resources may have been competent to complete this work, it is questionable that they could have met either the fast-track schedule or the cutover constraint given their other plant responsibilities. Indeed, the original schedule had a six-week estimate; as an outside resource focused on the task, ASG completed the work in two.

First and foremost, it is expensive to find and hire the right person to bring into your organization for what could be a limited time opportunity. Hiring expenses include recruiting fees to find technically qualified people, background checks and pre-employment tests, basic salary, employment taxes, benefits, space, office equipment, training and supervision. According to a Studer Group survey of 610 CEOs by Harvard Business School, it takes 6.2 months to reach a break -even point on a new employee.

Secondly, small to mid-sized manufacturers performing upgrades to maintain their competitiveness and productivity may do so on a somewhat erratic timetable. Some choose to deploy new technologies that will make them more environmentally friendly; or in some cases upgrades are required to comply with regulatory guidance. In these scenarios, outsourcing to a system integrator makes great financial sense.

System integrators work with manufacturers to develop the scope of work for the project, establish milestones and completion due dates all the while keeping a watchful eye on costs and expenditures. The system integrator’s project manager will provide timely communication to all internal personnel relevant to the project as well as manage any external communication with vendors that could include equipment price negotiation, documentation, training, delivery or set-up.

A system integrator won’t take six months to learn an organization’s process and procedures for a project. They will be credentialed, certified and ready to work on day one. These highly trained individuals will typically have their own programming tools and necessary vendor relationships to make efficient use of a project’s budget and timeline.

Projects have a beginning, middle and end. If a manufacturer had made a full time hire to support a specific project, the end of that project could mean an employee termination or layoff.

In the case of outsourcing, project completion merely signals a contractual end to the client/system integrator relationship, and the system integrator moves on to their next project. System integrators are tasked with performing a variety of upgrades across a broad spectrum of industries. They will work on disparate equipment from multiple vendors and to further complicate this, the age at which these systems, pieces of equipment or versions were put into service can range from current technology to several decades old. 

In our scenario above, the project was to replace old PLC’s with slightly newer ones. The manufacturer had a narrow window of opportunity during a scheduled plant shutdown to avoid production downtime.  


<< First < Previous Page 1 Page 2 Next > Last >>

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me