Outside forces cause fifth straight drop in PMI index

Pressures from oil prices, a weaker dollar and the West Coast dock strike weigh down index; PMI falls to 51.5% in March. The PMI remained above the 50% growth threshold for the index to extend the streak to almost six years; the 51.5% PMI for March still translates to a 2.6% growth in gross domestic product for the year.

04/01/2015


Pressures from oil prices, a weaker dollar and the West Coast dock strike weigh down the Institute for Supply Management's index for the fifth straight month as it fell to 51.5% in March. Courtesy: CFE MediaThe measuring stick for U.S. manufacturing declined for the fifth straight month in March, dropping to its lowest point in two years. The Institute of Supply Management PMI Index fell to 51.5% from 52.9% in February, as industry experts suggest a combination of labor, economic and environmental issues all put pressure on the manufacturing landscape. The PMI remained above the 50% growth threshold for the index to extend the streak to almost six years; the 51.5% PMI for March still translates to a 2.6% growth in gross domestic product for the year.

Since hitting a six-year high in August 2014 at 58.1%, the PMI Index has leveled off and then slumped. The fundamental causes of the drop, according to theInstitute of Supply Management's Manufacturing Business Survey Committee, is a combination of issues that don't have anything directly to do with manufacturing operations.

"Comments from the panel refer to continuing challenges from the West Coast port issue, lower oil prices having both positive and negative impacts depending upon the industry, residual effects of the harsh winter, higher costs of healthcare premiums, and challenges associated with the stronger dollar on international business," said Bradley S. Holcomb, chairman of the committee.

In fact, half of the 18 reporting industries reported growth in March, raw material prices fell for the fifth consecutive month and the Production Index was unchanged. 

Among the comments from committee members:

  • "Falling energies have helped on the cost side while sales are getting a boost through improvements in consumer disposable income." (Food, Beverage & Tobacco Products)
  • "Our business is still strong and on projection. Dollar strength is challenging for our international business." (Fabricated Metal Products)
  • "Business is still extremely strong." (Transportation Equipment)
  • "Oil prices impacting drilling and project activity. Pursuing cost reductions from suppliers for a wide variety of goods and services." (Petroleum & Coal Products)
  • "Business really starting to slow down. Oil pricing is having a major effect on energy markets." (Computer & Electronic Products) 
  • "Operating costs are higher due to increases in healthcare premiums." (Miscellaneous Manufacturing)
  • "March business is improving over Jan-Feb, thawing out of this crazy winter." (Paper Products)
  • "Dealing with ongoing delivery issues associated with congestion at the U.S. West Coast and Vancouver ports." (Machinery)

- Bob Vavra is content manager, Plant Engineeringbvavra@cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me