OSHA updates training rules to limit class length

After audit finds problems, instructors now limited to 7 1/2-hour days to enhance learning experience

10/27/2010


OSHA recently revised its policy for all Outreach Training Programs to address the number of hours each day a student may spend in OSHA 10- and 30-hour classes. OSHA revised the length of daily classroom instruction to prevent workers from being saturated with so much information that they may miss content that could prevent injuries, illnesses and death.

Revised program policy now requires OSHA trainers to limit worker training classes to a maximum of 7½ hours per day. Before OSHA made this change, there were no limitations on how long these classes could last each day. With 10 hours of training, along with necessary breaks and lunch, students could sit in classes for up to 13 hours a day. OSHA became concerned that long, mentally-fatiguing class days might cause students to miss essential safety and health training.

Another concern was that, in some cases, one- and three-day training classes were not meeting 10- and 30-hour program time requirements. This concern became evident after OSHA conducted random records audits and unannounced monitoring visits.

To address these issues, the agency now requires OSHA outreach trainers to conduct 10-hour courses over a minimum of two days and 30-hour courses over at least four days. The agency also set up an outreach fraud hotline at 847-725-7810 to which the public can call to file complaints about program fraud and abuse.

“Limiting daily class hours will help ensure that workers receive and retain quality safety training,” said Assistant Secretary of Labor for OSHA David Michaels.

This policy change is effective immediately and will be reflected in the next revision of the Outreach Training Program Guidelines. OSHA will not recognize training classes that exceed 7½ hours per day or do not meet all program content requirements. In such cases trainers will not receive completion cards to distribute to students. Trainers may, however, submit written requests for exceptions to limiting training days to 7½ hours based on extenuating circumstances.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me