OSHA renews strategic partnership to reduce injuries, lost work time at Ford Motor Co. auto plants

Partnership includes UAW, ACH and MIOSHA in partnership with OSHA, Department of Labor

06/13/2011


OSHA administrator Dr. David Michaels has signed an agreement renewing OSHA’s partnership with Ford Motor Co., the United Automobile, Aerospace and Agricultural Implement Workers of America and Automotive Component Holdings LLC, and welcoming the Michigan Occupational Safety and Health Administration as a new partner.

“OSHA’s partnership with Ford and the UAW has helped significantly reduce the frequency and severity of worker injuries,” said Michaels. “The partnership is a win-win for management and labor. It contributes to Ford’s competitiveness in the global economy while protecting the safety and health of thousands of workers.”

The goal of this strategic partnership is to prevent occupational fatalities, injuries and illnesses at participating Ford Motor Co. and Automotive Component Holdings locations in Michigan, Ohio, Illinois, Missouri and New York.

Since 2000, OSHA has had a partnership with Ford and the UAW. ACH joined the partnership more recently. The partnership has resulted in a 74 percent reduction in total case incident rates and an 88 percent decrease in days away from work, restricted duty and job transfers, better known as “DART,” rates. In 2010, 75 percent of worksites participating in this partnership had DART rates below Labor Department’s Bureau of Labor Statistics industry averages.

Plants covered by this agreement under federal OSHA include: Chicago Assembly Plant and Chicago Stamping Plant, Chicago, Ill.; Kansas City Stamping Plant, Kansas City, Mo.; Buffalo Stamping Plant, Hamburg, N.Y.; Cleveland Engine Plants 1 and 2, Brook Park, Ohio; Lima Engine Plant, Lima, Ohio; Ohio Assembly Plant, Avon Lake, Ohio; Sharonville Transmission Pant, Sharonville, Ohio; Sandusky Plastics Plant, Sandusky, Ohio; and Walton Hills Stamping Plant, Walton Hills, Ohio.

Michigan plants covered by this agreement under state OSHA include: Dearborn Tool and Die Plant; Dearborn Truck Plant; Dearborn Diversified Manufacturing Plant; Dearborn Stamping Plant; Dearborn Engine and Fuel Tank Plant; Michigan Assembly Plant in Wayne; Woodhaven Stamping Plant; Livonia Transmission Plant and National PDC in Livonia; Van Dyke Transmission Plant and Sterling Transaxle Plant in Sterling Heights; Romeo Engine Plant; Rawsonville Parts Plant; Brownstown Parts Redistribution Center in Romulus; Woodhaven Forge Plant; and Saline Instruments and Plastics Plant and the Sheldon Road Plant in Plymouth Township.

www.osha.gov

 - Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me