OSHA proposes more than $1 million in fines for willful, serious violations

Piping Technology and Products has been cited for intentionally misleading OSHA about amputation hazards.

01/03/2012


The U.S. Dept of Labor’s Occupational Safety and Health Administration has cited Piping Technology and Products Inc. for 13 willful and 17 serious violations for exposing workers to the risk of amputations and other serious injuries from dangerous machinery, as well as other hazards, at the company’s Houston facility. Proposed penalties total $1,013,000.

“Repeatedly ignoring the law while risking workers’ lives and providing misleading information to federal investigators will not be tolerated,” said Secretary of Labor Hilda L. Solis. “Employers who endanger the lives and limbs of their employees must be held accountable.”

A worker at Piping Technology contacted OSHA earlier this year, alleging a lack of brakes on overhead cranes and unguarded presses at the company’s facility on Holmes Road. This complaint triggered an investigation by OSHA’s Houston South Area Office. In addition to substantiating the complaint items, the inspection found that employees were permitted to cut metal I-beams and pipes without the proper machine guarding, which exposed them to possible severe injuries. Additionally, OSHA inspectors found that during machine maintenance, workers were exposed to the unexpected release of stored energy because of improper safeguards.

“Piping Technology deliberately exposed its workers who operate band saws and other dangerous machinery to amputation hazards while misleading OSHA investigators about the use of these machines,” said Assistant Secretary of Labor for OSHA Dr. David Michaels.

The willful violations involve the failure to guard seven band saws and to lock out all of the sources of hazardous energy to six pieces of equipment before service and maintenance. Each of the 13 citations carries a penalty of $70,000, for a total of $910,000. A willful violation is one committed with intentional knowing or voluntary disregard for the law’s requirements, or with plain indifference to employee safety and health.

The 17 serious violations, with penalties totaling $103,000, involve the failure to guard other machines and grinders properly, ensure that openings on electrical equipment were securely closed, provide fall protection training and ensure that employees wore hard hats when exposed to overhead hazards. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Piping Technology had knowledge of OSHA requirements due to citations issued in 1986, 1994, 2004 and 2005 that specifically addressed the need to guard the band saws used in production processes. In 2004 and 2005, OSHA cited the company with penalties totaling $82,500 and $33,000, respectively, for a variety of workplace hazards that included lockout/tagout violations.

OSHA has placed Piping Technology in its Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. Initiated in June 2010, the program focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. For more information on SVEP, visit http://s.dol.gov/J3.

The citations can be viewed at http://www.osha.gov/ooc/citations/Piping-tech-prod-312928344-1228-11.pdf.

Piping Technology and Products has 15 business days from receipt of the citations to comply, request an informal conference with OSHA’s Houston South area director or contest the citations and penalties before the independent Occupational Safety and Health Review Commission.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me