OSHA increases focus on workplace violence

OSHA's directive comes on the heels of recent investigations of workers being assaulted or killed while in the workplace in three different states.

09/09/2011


OSHA issued a directive on Enforcement Procedures for Investigating or Inspecting Incidents of Workplace Violence. The directive establishes uniform procedures for OSHA field staff for responding to incidents and complaints of workplace violence and conducting inspections in industries considered vulnerable to workplace violence, such as healthcare and social service settings, and late-night retail establishments.

Workplace violence is a serious recognized occupational hazard, ranking among the top four causes of death in workplaces during the past 15 years. More than 3,000 people died from workplace homicide between 2006 and 2010, according to the Bureau of Labor Statistics. Additional BLS data indicate that an average of more than 15,000 nonfatal workplace injury cases was reported annually during this time.

A recent OSHA inspection of a Maine psychiatric hospital found more than 90 instances in which workers were assaulted on the job by patients from 2008 through 2010. The hospital was cited for not providing its workers with adequate safeguards against workplace violence and a fine of more than $6,000 was proposed. OSHA has also recently cited facilities in New York and Massachusetts where employees have been killed as a result of assaults.

“These incidents and others like them can be avoided or decreased if employers take appropriate precautions to protect their workers,” said Assistant Secretary of Labor for Occupational Safety and Health Dr. David Michaels. “We have accompanied this directive with a new Web page on Preventing Workplace Violence to help employers address workplace violence issues.”

Studies by the National Institute for Occupational Safety and Health and other organizations show that employers who implement effective safety measures can reduce the incidence of workplace violence. These measures include training employees on workplace violence, encouraging employees to report assaults or threats, and conducting workplace violence hazard analyses. Other methods such as using entrance door detectors or buzzer systems in retail establishments, and providing adequately trained staff, alarms and employee “safe rooms” for use during emergencies in healthcare settings can help minimize risk.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me