OSHA cites roofing materials manufacturer for fourth time

U.S. Minerals could get $1.25 million in fines after inspections find 'extremely high levels of hazardous dust and other dangers'

12/14/2010


OSHA has cited U.S. Minerals LLC with willfully exposing its workers to dangerously high levels of hazardous dust, and not providing adequate breathing protection and training for workers at its facility in Coffeen, IL. The company, headquartered in Dyer, IN, has been issued a total of 28 health and safety citations with proposed penalties of $396,000.

It is the latest in a series of OSHA citations against the abrasive blasting and roofing materials manufacturer that has resulting in more than 100 safety citations and brings the proposed fines to U.S. Minerals to almost $1.25 million.
"U.S. Minerals has severely jeopardized the health and safety of its workers by exposing them to extremely high levels of hazardous dust and other dangers," said Assistant Secretary of Labor for OSHA Dr. David Michaels. "This is the fourth U.S. Minerals facility where very serious violations were cited in the past three months, clearly indicating these problems are widespread and systemic. This blatant disregard of workers' health and safety is not acceptable."
Inhalation of the hazardous dust material produced at the facility can cause debilitating lung disease such as pneumoconiosis, which is characterized by symptoms including chronic cough, difficulty breathing and shortness of breath.
This investigation falls under the requirements of OSHA's Severe Violators Enforcement Program. Initiated in the spring of 2010, SVEP is intended to focus on recalcitrant employers who endanger workers by committing willful, repeat or failure-to-abate violations in one or more of the following circumstances: a fatality or catastrophe; industry operations or processes that expose workers to severe occupational hazards; employee exposure to hazards related to the potential releases of highly hazardous chemicals; and all egregious enforcement actions. For more information on SVEP, go to http://www.osha.gov/dep/svep-directive.pdf.
OSHA has issued the U.S. Minerals Coffeen facility six willful citations with proposed fines of $336,000 for exposing workers to levels of hazardous dust at concentrations higher than the permissible exposure limit; failure to implement a written respiratory protection program or to mandate employees wear respirators; failure to implement engineering controls to reduce harmful dust exposures; and failure to develop and utilize energy control procedures. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirements or plain indifference to employee safety and health.
"U.S. Minerals continually has failed to come into compliance on safety issues such as providing adequate breathing protection," said OSHA Area Director Thomas Bielema in Fairview Heights, IL. "We are committed to seeing that the workers at this facility are provided a safe and healthful workplace."
The company has received seven repeat citations with fines of $34,200 for violating permit-required confined space entry rules, failure to provide fall protection, failure to provide required training on energy procedures and failure to provide guards on mechanical powered equipment. A repeat violation is issued when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years.

The company also has been issued 10 serious citations with proposed penalties of $24,000. Violations include failure to assess the need for adequate personal protective equipment; inadequate eye protection; failure to develop procedures and practices for permit-required confined space entry; lack of a written hazard communication program; inadequate information and training on dust containing silica; and failure to cover floor holes and enclose electrical boxes. A serious citation is issued when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.
The company also has received five other-than-serious citations with $1,800 in penalties for lack of proper injury and illness recordkeeping. An other-than-serious violation is one that has a direct relationship to job safety and health but probably would not cause death or serious physical harm.
The company manufactures abrasive blasting and roofing materials from slag produced at coal-fired power plants. In September, OSHA issued a $466,400 penalty to the company's facility in Baldwin, IL., citing 35 health and safety violations for willfully exposing workers to dangerously high levels of hazardous dust and failing to provide adequate breathing protection. As a result of the egregious conditions found at that worksite, OSHA initiated inspections of the company's other facilities, including the Coffeen location. The company's Harvey, LA, operation was cited last month with 30 violations and proposed penalties of $110,400. The Galveston, TX, facility was fined $273,000 last week, and cited with 38 violations for exposing workers to fall and machine guarding hazards.
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me