OSHA charges 46 safety violations at Texas trailer manufacturer

Eye injuries among citations; $950,000 in proposed fines

09/29/2011


OSHA has cited PJ Trailers Manufacturing Co. Inc. and Delco Trailers Co. Inc., a similar company owned by PJ Trailers, for seven willful, 26 serious, nine repeat and four other-than-serious violations. OSHA inspectors found workers exposed to unguarded machinery, fall hazards and accumulations of potentially hazardous dust, among other violations. Proposed penalties total $949,800.

“Employers have a responsibility to keep their workers safe and healthy. Willful and repeat citations, as well as significant penalties, reflect the fact that management knew workers were exposed to dangerous conditions yet failed to provide them with basic safety protections. That choice is unacceptable and needlessly placed these workers’ health and safety at risk,” said OSHA administrator Dr. David Michaels.

PJ Trailers Manufacturing and Delco Trailers are commonly owned, with the same president and management. They share a work site, a human resources division and a safety and health manager, and they have interrelated and integrated operations. PJ Trailers and Delco Trailers previously had been cited by OSHA for many of the same hazards that the agency found during its most recent inspection. Although the company had certified abatement of the prior hazardous conditions, many of the fixes were later abandoned to accommodate production. Since 2008, at least 15 workers have suffered eye injuries requiring medical treatment and or days away from work.

OSHA’s Dallas Area Office initiated a safety and health inspection at the company’s facility following receipt of a complaint that employees were not adequately protected from being injured by rotating machinery parts, and employees were exposed to toxic welding fumes while fabricating trailers and noise levels above approved health standards.

The willful violations involve failing to provide fall protection for employees working on stacked trailers, provide adequate machine guarding to prevent “caught-in” or “caught-between injuries,” provide employees with proper eye protection during cutting and welding operations, and establish and maintain an audiometric testing program. Audiometric testing is required when employees are exposed to high noise levels to determine if their hearing is being adversely affected. A willful violation is one committed with intentional, knowing or voluntary disregard for the law’s requirements, or with plain indifference to employee safety and health.

Repeat violations include failing to ensure that all spray booth areas were kept free from accumulated powder coating, guard several pieces of hazardous machinery, have all necessary lockout/tagout procedures, provide training on existing lockout/tagout procedures to protect employees from hazardous machinery starting up unexpectedly and ensure that medical evaluations were completed to determine employees’ ability to use respirators. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. OSHA cited the company in September and October of 2006 and March 2010 for similar violations.

Serious violations include failing to provide required fall protection, provide training on electrical hazards and prevent exposure to welding fumes in excess of the average allowed during an 8-hour shift. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Other-than-serious violations include failing to enter recordable injuries and illnesses on the OSHA 300 log within seven calendar days and properly certify the OSHA 300A form or its equivalent. An other-than-serious violation is one that has a direct relationship to job safety and health, but probably would not cause death or serious physical harm.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me