Organizing your emergency maintenance

TPM has been around industry for over 25 years, and yet is still an new concept to many organizations. There are many myths and misunderstandings about TPM that circulate industry.

02/14/2012


 

By Mark Jolley, Manager of Consulting Services, Marshall Institute


Image courtesy: Marshall InstituteOne of the best ways of improving our response time in critical breakdown mode is to have our tools and parts well organized. When a critical piece of equipment has gone down unexpectantly, we as maintenance professionals are forced into an EMT (Emergency Maintenance Technicians) role. We are expected to repair the broken equipment ASAP. This type of maintenance is never our preferred maintenance strategy but it happens and we should be prepared for it.

There are some things we can do to prepare for breakdown, or emergency maintenance. We should use the model of our local rescue squads or fire departments. Their philosophy is to be prepared for every conceivable emergency. They do this by storing a wide array of medications, first aid dressings, and equipment within their mobile trucks. Everything is stored according to frequency of use. What gets used the most is stored closest to the door so it can be accessed quickly. They have equipment stored according to symptoms. If they roll up on a car accident for example, they have quick response bags organized to best treat wounds often associated with such accidents. Likewise, if they respond to a possible heart attack, they have a kit or quick response bag prepared for that too. We can prepare for breakdown maintenance in much the same way as Emergency Response Teams respond to accidents.


First, we should develop a list of our critical equipment so that we can develop an emergency contingency plan for each piece of equipment. We should build emergency kits and store them so that they can be accessed to quickly in case the case of an emergency breakdown. These kits should include such things as: critical spare parts, any special tooling required for repairs, equipment schematics, job plans for the most common breakdowns, lock out/tag out procedures, etc.


Breakdowns are going to happen. With a little thought and pre-work, we can greatly reduce downtime usually associated with emergency breakdowns.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me