Optimism for economic growth in the near future

91% of manufacturing executives are optimistic about the growth of their company in coming months

03/24/2011


Senior management at U.S. manufacturing companies are significantly more optimistic about their own companies’ growth than they were just three months ago in November, according to a Grant Thornton LLP February survey. Nine in 10 (91%) report that they are optimistic about their companies’ growth in the next six months, up from 81% in November.

As for the economy, 60% believe that the U.S. economy will improve in the next six months, up from 49% in November. However, those planning to increase hiring in the next six months saw a drop to 44% in February from 49% in November.

“We believe that the decrease in expected hiring despite an overall high level of optimism is because manufacturing executives feel some uncertainty about the future of manufacturing in the U.S.,” said Wally Gruenes, Grant Thornton’s national managing partner for Consumer and Industrial Products and a member of the Board of Directors of the National Association of Manufacturers (NAM). “These executives believe that the United States government has no battle plan to make American manufacturing more competitive in order to create more good-paying jobs. In fact, to the contrary, they believe Washington has created a climate that has made American manufacturers less competitive over the years.

“Rather than spending scarce resources on employees, manufacturing executives are spending on capital equipment purchases and technology to improve productivity and lower costs in an effort to be more competitive globally,” continued Gruenes.

With regard to reducing the U.S. government budget deficit, manufacturing execs favor cutting spending 4 to 1 over raising taxes.

In order to reduce U.S. government budget deficits…

NAM has put forth to the current administration a “Manufacturing Strategy for Jobs and a Competitive America” that includes the following key tenants:

  1. Create a tax climate that is competitive — The United States has the second highest statutory tax rate among the major industrial countries (Japan has the highest rate but has proposed a reduction, leaving the U.S. with the highest statutory rate).
  2. Stop the continual expansion of federal mandates and labor regulations that increases costs to the employer and discourages the hiring of new employees.
  3. Implement a fair approach to legal reform. Direct tort costs account for almost 2% of GDP in the United States — the highest in the world.
  4. Create a regulatory environment that promotes economic growth. Current laws impose substantial compliance costs never anticipated by the lawmakers.
  5. Enact tax provisions that will stimulate investment. For example, make the R&D tax credit permanent and increase the rate.
  6. Enact pending trade agreements quickly to reduce barriers to U.S. exports.
  7. Support health care reform that drives down costs.

“Based on my discussions with manufacturing executives, they support NAM’s strategy, but are skeptical that the current administration will act on their recommendations,” concluded Gruenes.

www.GrantThorton.com

Grant Thorton LLP

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me