Open process automation leads to innovation

Innovation helps distinguish between a leader and follower and can take companies and users into directions they never anticipated, according to Kenny Warren of ExxonMobil during his keynote speech at the ARC Industry Forum.


Kenny Warren, vice president of engineering, ExxonMobil Research & Engineering. Courtesy: Mark T. Hoske, Control EngineeringInnovation helps distinguish between a leader and follower, said Kenny Warren, vice president of engineering, ExxonMobil Research & Engineering, citing Steve Jobs, Apple co-founder. Warren, using the Apple iPhone as an example, released more than 10 years ago. Since then, smartphone innovation has developed new technologies and apps that have created new possibilities for consumers, and disrupted the music and transportation industries. Other unforeseen apps include location services, which, combined with mobile transactions, is helping to prevent banking fraud.

"You never know where innovation will take you," Warren said in his keynote address "Open Process Automation: Industry Standards and ExxonMobil's Plan," at the ARC Industry Forum in Orlando, Fla.

Warren discussed ExxonMobil's contract with Lockheed Martin two years ago as part of an effort to develop an open, interoperable, and secure process automation architecture commercially available for all for on-process use by 2021.

The proof-of-concept, which started in December 2016, issued a request for proposal (RPF) to 82 suppliers and system integrators. Two months later, 46 responses were received two months later and 10 proposals were included in the RPF. The proof-of-concept went operational in September 2017, and the proof-of-concept project will be completed in March. Warren said they're hoping for collaborative development through the field trials with other operating companies.

Warren highlighted some of the benefits of open process automation. For end users, the benefits include: 

  • Support reuse of control system applications
  • Increase value creation
  • Enable continuous innovation
  • Solve system integration issues
  • Be safe and intrinsically secure
  • Empower workforce and reduce total cost of ownership (TCO).

Open process automation benefits include control system applications reuse, reduced total cost of ownership (TCO), and the ability to reach new markets and customers. Courtesy: Mark T. Hoske, Control EngineeringFor suppliers, open process automation benefits include ability to:

  • Reach new markets and customers while remaining relevant to existing customers
  • Create new goods and services
  • Grow the bottom line by increasing margins and reducing costs.

Warren said this is important to ExxonMobil and other companies supporting The Open Group because these tests and trials will improve data acquisition and analytics. They can monetize fleet operations and provide a globally consistent above-site approach, constancy, and transparency over time.

The path to increased productivity, Warren said, is to replace a closed layer with open one. The industry today is less like the hardware-defined architecture of 1980s. The internet, cloud, robotics, machine learning, and AI, need a standards-based, open interoperable digital architecture. The industry is changing at faster speeds and innovation is vital, Warren said, who closed by asking, "Where will you be in 10 years?"

Chris Vavra, production editor, Control Engineering, CFE Media,, with notes from Mark T. Hoske, content manager, Control Engineering, CFE Media,

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me