Open innovation: NineSigma uncovers solutions to the tough engineering problems

As a research & development executive in the fabric care unit of Procter & Gamble (P&G), Paul Stiros grew weary trying to create a product that would prevent cotton clothing from wrinkling while being worn. He turned to NineSigma, a start-up that promised to link manufacturers facing product development dilemmas with t...


As a research & development executive in the fabric care unit of Procter & Gamble (P&G), Paul Stiros grew weary trying to create a product that would prevent cotton clothing from wrinkling while being worn. He turned to NineSigma , a start-up that promised to link manufacturers facing product development dilemmas with third parties bearing solutions.

Not only did Stiros find his anti-wrinkle agent, but a few years later he found a new job as NineSigma's president and CEO. “I knew this was a concept that would catch on quickly,” he says of NineSigma's business model, which the company calls Open Innovation. “It addressed a real need, and it was providing real solutions.”

NineSigma was launched in 2000 by Dr. Mehran Mehregany, who got the idea to form the company after being asked numerous times by government agencies—specifically the national laboratories—to lend his expertise in solving technical problems.

To date, Stiros says NineSigma has helped more than 1,000 companies find solutions to engineering or technical problems. One of those companies was Stiros' former employer, Procter & Gamble (P&G), which had a packaging problem with a brand of laundry detergent it was selling in Europe.

The detergent was packaged in pouches made of a water-soluble film, and the pouches were placed in cardboard boxes. A number of these pouches developed small leaks that caused oil spots to form on the cardboard boxes. Customers selecting this brand of detergent naturally opted for the non-oily boxes. After a while, only oil-stained boxes were left on store shelves, and this started harming product sales.

NineSigma's search led to a solution from a small company in the U.K. that makes insecticides, pesticides, and herbicides. It turned out this company was using the same water-soluble film to package some its products, and had learned that the leaking problem could be alleviated in the packaging process. Once NineSigma connected P&G with this supplier, the two made a deal to address P&G's issue.

Searching for companies that can solve a problem— solution providers , in NineSigma vernacular—is the second of three steps that NineSigma takes in dealing with its clients, which it calls innovation seekers .

The first step is working with the client to define their need as a general scientific problem. This involves developing requests-for-proposals (RFP) that can be responded to by people in a number of industries—e.g., you get an agricultural products manufacturer solving a consumer goods problem.

In step two, NineSigma combs its database of more than 800,000 solution providers for potential candidates to solve the problem. Says Stiros, “We have relationships with professional and technical associations that redistribute our RFPs to their members, and that brings another 750,000 entities into the process. We also find that the people who receive our RFPs are redistributing them to people they think might be able to solve a problem.”

Once the NineSigma client identifies the best candidate for solving its problem, NineSigma introduces the two parties and facilitates communication until a contract is signed. Stiros says the entire process is conducted in such a way that neither party has to fear having intellectual property compromised.

“The proposals only contain the company's capabilities for addressing the problem,” says Stiros.

NineSigma is compensated by the solution seeker with what Stiros describes as a “small discovery fee” that covers the three steps for finding a solution provider. If a solution is found, NineSigma collects a “success fee.”

Stiros says NineSigma doesn't accept fees from solution providers because it wants to avoid any appearance of having a conflict of interest.

“A lot of companies claim to represent inventors, but their success rates are quite low,” says Stiros. “We don't want to be associated with that industry. We also set our discovery fee low so that our success is dependent on our clients finding solutions to their problems.”

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me