Obama signs Workforce Innovation and Opportunity Act

PMA, NTMA say bill will help members to fill skills gap openings

07/22/2014


Manufacturing leaders hailed the signing of the Workforce Innovation and Opportunity Act (H.R. 803) on July 22 by President Obama. The House had narrowly passed the bill 215-202 with widespread Republican support, while the Senate voted overwhelmingly 95-3 to approve the measure.

Representatives for the Precision Metalforming Association (PMA) and the National Tooling and Machining Association (NTMA) said in a press release the new law would “close the skills gap in the U.S. manufacturing sector and enable employers to find and hire workers with the skills needed for competitiveness in modern manufacturing.”

The press release stated the bill would:

  • Eliminate outdated programs
  • Provide accountability and data reporting requirements
  • Require implementation of industry or sector partnerships and career pathway strategies
  • Increase the ability to use on-the-job training (reimbursement rates up to 75%) and incumbent worker training (may use up to 20% of local funds).

A recent survey of PMA and NTMA members found 75% of association members have job openings in manufacturing plants, and 80% report that they are having challenges recruiting qualified employees.

“The skills gap is a pressing challenge that has caused many U.S. manufacturers to have serious shortages of qualified potential employees,” said NTMA President Dave Tilstone. “Our members have seen this problem first-hand and we are hopeful that this new legislation will help with recruitment and retention for our sector which is vitally important to the American economy.”

NTMA and PMA sponsor activities to attract students and new workers to manufacturing including NTMA’s National Robotics League and NTMA-U and PMA’s Women in Manufacturing.

“The good news is that the U.S. manufacturing sector is only expanding,” said PMA President Bill Gaskin. “We are pleased that our voices have been heard and our government is taking this important step to support our members and the manufacturing industry as a whole.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me