Nuclear safety issues mount in South Korea

Recent security concerns during inspections have heightened concerns about the safety of South Korea's nuclear reactors, particularly after a recent scandal that involved the use of unverified parts.

12/11/2012


ISS SourceTiny cracks in tunnels at a nuclear plant in South Korea are hiking worries about nuclear safety in the country following a recent scandal involving the use of unverified parts.

The reactor where officials found the cracks will remain offline until regulators investigate the problem, putting extra strain on South Korea's already stretched power supply going into the winter months.

The utility Korean Hydro and Nuclear Power Co. (KHNP) said it detected microscopic cracks in six control rod tunnels at Unit 3 of its Yonggwang nuclear plant in the southwest of the country. Control rods regulate the speed of nuclear reactions taking place inside reactors.

“The cracks are not serious and there is no risk of radiation leakage,” said Jang Yong-jin, head of the mechanics department at KHNP.

Workers found the problem while the reactor was down for a regular 36-day maintenance period. But it will now stay out of service for a further 47 days as inspectors seek to determine the cause of the cracks, the South Korean Nuclear Safety and Security Commission said.

That deprives the national power grid of another source after operations stopped this month at two other reactors at the same complex to replace thousands of parts forged quality certificates.

Authorities said at the time halting those two reactors, Units 5 and 6, may result in “an unprecedented level” of strain on the nation’s power supply. They account for about 5% of South Korea’s total supply, according to the government.

“Winter here is brutal, and I am now very concerned that the unexpected shutdowns of three nuclear units will cause power shortages,” said Huh Kyun-young, a nuclear engineering professor at Kyung Hee University.

Experts have been warning about insufficient power supplies in South Korea for years, Huh said.

It remains unclear how the power supply will suffer by the extended shutdown of Unit 3, Jang said.

“Relevant departments are mapping contingency plans,” he said.

The cracks themselves are not a serious issue and have been found at reactors in such other countries as the United States and Japan, said Jae Moo-sung, a professor in the nuclear engineering department of Hanyang University.

But Jae warned the news could hurt South Korea’s efforts to export its nuclear power technology to other countries.

The problems at the South Korean reactors come amid increased scrutiny of nuclear power worldwide following the crisis at the Fukushima Dai-ichi nuclear plant in Japan during the aftermath of the earthquake and tsunami that hit the country in March 2011.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me