North American International Auto Show - Analyst perspective

Alastair Hayfield provides some insights on the latest developments in the automotive industry from the North American Industrial Auto Show in Detroit

01/25/2012


IMS Research LogoThis year’s [North American International Auto Show] NAIAS found the weather unseasonably warm in Detroit. Pleasantly, the weather seemed to be mirroring the general industry sentiment too: the last few years have been tough, but 2011 has been better than expected and there is reason to be optimistic about 2012. In fact, when Dieter Zetsche, CEO of Daimler AG, used the Mercedes press junket to say he is seeing signs of recovery in the US economy, it was very encouraging.

There was plenty on show at NAIAS to keep an industry analyst entertained. Here are my thoughts on some of the key developments from the show:

Electric vehicles

Continuing a trend seen at the IAA event in Frankfurt, major OEMs continue to develop hybrid and electric vehicles and concept cars.

VIA Motors showcased its range extended electric trucks. VIA’s board of directors is a ‘who’s who’ of the auto industry, including Bob Lutz, ‘father’ of the Chevrolet Volt. The vehicles that VIA is promoting offer a compelling value proposition – a more fuel efficient truck, with 40 miles of electric only range, that can then be used as a power source for tools, provide power in remote locations, or be used as a backup power supply if home/work power fails. Initially, this concept might gain traction with fleet operators looking to save on fuel and maintenance costs, but also those who want to add practical functionality to their fleets. The threat to this model comes from improving internal combustion engines, with superior fuel efficiency to current engines. A fleet of trucks with newer, more efficient engines could be just as compelling.

Toyota appeared keen to reinforce its leadership in the hybrid and alternative fuel vehicle space. It showcased the Prius C, the NS4 concept vehicle, and committed to release a hydrogen fuelled mid-sized sedan by 2015. The Prius C is a hybrid vehicle aimed at younger drivers, with the intention that it becomes a gateway vehicle – converting new, younger drivers into Toyota brand ambassadors. The $19k price tag for the base model will certainly make the vehicle more affordable to younger drivers than Toyota’s other hybrid offerings. The NS4 concept vehicle is a PHEV and it is indicative of where Toyota wants to take its vehicles – playing on advanced HMIs that will mimic smartphones and provide cloud-based telematics (in fact, Toyota was the only vendor to mention the cloud to my knowledge). Future vehicles are also likely to feature more innovative safety/security features, and innovative materials; for example, the NS4 concept car featured four different glass technologies.

Ford released a BEV Ford Focus, an addition that complements its hybrid and fuel efficient vehicles. Interestingly though, Ford’s marketing material reveals the major problem facing the hybrid and electric vehicle market. Describing the Ford Focus as giving ‘real-car’ performance seems a way of reassuring consumers that hybrids/BEVs are proper, viable alternative to traditional autos. Is this really necessary, or does it imply that auto makers still have the mind-set that consumers don’t take hybrid/electric vehicles seriously?

Mercedes introduced the Smart For-Us concept based on the Smart ForTwo. The interesting feature was the power socket in the cargo area for charging ebikes. Although unlikely to go into production, it shows continuing innovation around ‘urban mobility’ concepts. Mercedes also introduced two new hybrid E-class vehicles.

Infotainment/HMI

Chrysler presented the Dodge Dart – a feature rich compact car based on Alfa Romeo’s Giullietta. Chrysler/Dodge hasn’t had a compact car in its line-up, and this release is one way that it is looking to maintain the momentum behind its recent growth. I think this release also reinforces the on-going trend of ‘feature bleed’ from premium autos to mid- and small-sized cars. Because consumers are opting for smaller, more economical vehicles, small ‘touches of luxury’ that improve the driving experience are becoming increasingly important. For example, all but the base model of the Dodge Dart will feature an 8.4-in. screen on the centre stack, and a 7-in. reconfigurable instrument cluster; features not typically seen on a car that costs south of $18k.

Audi highlighted its use of an NVIDIA chipset for future infotainment and instrument cluster solutions. Audi asserted that more rapid development of technologies and adoption of consumer electronic technologies in the car is essential. In fact, at the CES in Las Vegas Audi demonstrated its gesture controlled HUD.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me