No risk plan results in big fine

Sinclair Oil is facing a $378,000 fine after a 2010 EPA inspection showed the company hadn't properly implemented its risk management plan for its Rawlins, WY, refinery.

12/11/2012


ISS SourceWith no proper risk management plan in place, Sinclair Oil is facing a $378,000 fine from the government.

Under a settlement with the U.S. Environmental Protection Agency (EPA), the fine is a result of a 2010 inspection of the company’s troubled oil refinery near Rawlins, WY, the agency announced Thursday.

The inspection showed Sinclair hadn’t properly implemented its risk management plan, a key requirement for the facility, which deals with a large range of toxic substances and hazardous gases, the EPA said.

“Sinclair has had several accidents and releases of hazardous substances over the past several years that relate to process equipment,” said Mike Gaydosh, director of EPA’s enforcement program in Denver. “This settlement will help ensure the company is operating in accordance with industry standards to protect the environment as well as residents of nearby communities.”

Under the terms of the deal, Sinclair will also update operating procedures for its process equipment, provide additional training to workers, improve maintenance of equipment and perform integrity tests on pressure vessels and piping that will reduce the possibility of an accidental release of hazardous chemicals from the refinery, the EPA said.

Sinclair is working “Very aggressively and with great urgency” on the refinery near Rawlins, company spokesman Clint Ensign said.

“We’re devoting more personnel and resources to helping that refinery be better because this is not who we are as a company,” he said. “We’ve done much better in the past and we need to address these situations, and we’re doing so with great urgency.”

The costs of the requirements weren’t available from the EPA or on the court order detailing the settlement filed with the U.S. District Court in Wyoming. Ensign said the deal between the EPA and Sinclair occurred earlier this year.

“Most of the items noted in their 2010 review have already been addressed and taken care of,” Ensign said. “There are some remaining items that are on a set schedule to be addressed.”

Regulators and inspectors have been busy with the refinery, leveling millions of dollars in penalties against Sinclair in the past year and requiring pollution control upgrades and training.

This most recent settlement comes shortly after regulators fined Sinclair for a number of other incidents.

Sinclair just received a fine of $215,250 by the Occupational Safety and Health Administration (OSHA) for two separate fires in May that severely burned several workers.

Sinclair and the EPA reached a $14.3 million settlement in August for excessive emissions of nitrous oxide and sulfur dioxide in incidents dating back to 2008.

In 2011 alone, the state Department of Environmental Quality reached a $5.4 million settlement with Sinclair over a 2010 oil leak that killed birds on the refinery’s evaporation ponds.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me