Nissan, Daimler to make engines in Tennessee plant

Facility will produce 4-cylinder engines for Mercedes and Infiniti as part of collaboration agreement.

01/09/2012


Nissan and Daimler will produce Mercedes-Benz 4-cylinder gasoline engines together at Nissan's powertrain assembly plant in Decherd, Tenn. Production will begin in 2014, with installed capacity of 250,000 units per year once full ramp-up is achieved. The Decherd facility will produce engines for Mercedes-Benz and Infiniti models.

"This is the newest milestone in our pragmatic collaboration and our most significant project outside of Europe so far," said Renault-Nissan CEO Carlos Ghosn. "Localized capacity reduces exposure to foreign exchange rates while rapidly enabling a good business development in North America - a win-win for the Alliance and Daimler."

The collaboration marks the first production of Mercedes-Benz engines in the North America Free Trade region. The Tennessee plant's strategic location and logistics links ensure a direct supply of engines starting in 2014 for the Mercedes-Benz C-Class, built at Daimler's vehicle plant in Tuscaloosa, Ala.

"In the context of our Mercedes-Benz 2020 growth strategy, we have decided that we will expand the production capacities required for this close to the customers. Through the strategic extension of our cooperation with Renault-Nissan we can realize near-market engine production in the NAFTA region on attractive economic terms and make optimum use of synergies arising from the cooperation," Dr. Dieter Zetsche, Chairman of the Daimler Board of Management and Head of Mercedes-Benz Cars, said. "Thus we are systematically broadening our manufacturing footprint in this important growth market."

Nissan began powertrain assembly in Decherd in 1997. Today it manufactures 4-, 6- and 8-cylinder engines for the complete lineup of U.S.-produced Nissan and Infiniti vehicles. The plant also houses crankshaft forging and cylinder block casting operations. In 2011, Decherd produced more than 580,000 engines on a covered area of more than 1.2 million square feet (111,000 square meters).

Project portfolio expands

Daimler and the Renault-Nissan Alliance launched their strategic collaboration in April 2010, including an equity exchange that gives the Renault-Nissan Alliance a 3.1% stake in Daimler and Daimler a combined 3.1% interest in Renault and Nissan.

The collaboration began with three project pillars:

  • Joint smart/Twingo architecture: The project is on track for launch in the early first quarter of 2014. Two-seater smart vehicles will be produced at Daimler's plant in Hambach, France, and four-seater smart and Renault production are slated for Renault's plant in Novo Mesto, Slovenia.
  • All-new entry-level city van project for Mercedes-Benz: The project is on schedule with expected launch in late 2012.
  • Powertrain cross-supply: The Alliance is supplying Daimler with compact three-cylinder gasoline engines to be used in smart and Twingo vehicles and four-cylinder diesel engines to be used in the jointly developed light commercial vehicle and in Mercedes-Benz's next generation of premium compact cars. Daimler will supply Nissan and Infiniti with four- and six-cylinder gasoline and diesel engines from the current and future engine portfolio as well as with automatic transmissions.

Since its founding in April 2010, the collaboration has been gradually expanded. In addition to the announcement this week about North American engine production, the companies had also earlier decided to partner on:

  • Platform sharing: Infiniti plans to base a premium compact vehicle on the Mercedes compact-car architecture, starting in 2014.
  • Zero-emission vehicles: Daimler will provide batteries from its production facility in Kamenz, Germany, and Renault-Nissan will provide electric motors for the use in electric vehicles (smart and Twingo ZE). First releases will occur in 2014.


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me