News and comment: Can WirelessHART and ISA100 converge?

Emerson Process Management offers its thoughts on how the two main competing wireless instrumentation protocols can come together.

03/31/2010


 

After hearing a number of discussions on the topic of process device level wireless protocols at the ISA Expo last October, and the ARC Advisory Group Summit in February, it appeared to me that there was more heat than light being produced as groups hammer out their protocols and explore the possibilities of convergence.

It seemed that it might be useful to ask the WirelessHART folks what they hope to see from the convergence efforts, so I went to Emerson Process Management for an opinion on the topic. Emerson certainly has "skin in the game" in that it has been the leading vendor proponent of the protocol and was the first to begin selling actual products using WirelessHART.

(If you wonder why we're offering a single view on the topic, bear in mind that we did the same for Honeywell in 2007, publishing an open letter from Jack Bolick , who was at that time the president of Honeywell Process Solutions . He advocated voting "no" on the WirelessHART protocol and gave his reasons why. We later followed with a response from the HART Communications Foundation .)

Here is Emerson's suggested path to convergence between WirelessHART and ISA100 , as drafted by Peter Zornio, chief strategic officer for Emerson Process Management:


Emerson believes it is important and possible to both address end users demands for a single wireless standard for process automation and also preserve their significant investments in IEC 62591, WirelessHART products. In addition, Emerson would like to complete ISA100.11a by adding the key element that will make it interoperable. We believe that the best way to achieve convergence between WirelessHART and ISA100.11a is to create a Process Automation Application Profile for ISA1100.11a that incorporates the international standard IEC 62591, WirelessHART, as the Application Profile for process automation.

This approach meets the following requirements of end users:

• Allows convergence between the IEC 62591, WirelessHART global standard and the future ISA100.11a specification which is currently being revised. (A correction/corrigendum to the draft ISA100.11a specification is expected to be sent for vote in late 2010 or early 2011.)
• Protects their significant investment in WirelessHART products and leverages end user extremely positive experience of over 100 million hours of WirelessHART field device operation.
• Leverages the base of 26 million installed HART devices in customers facilities today by extending the use of existing tools and training.

• Allows ISA100.11a to achieve device interoperability.

• As it exists today, ISA100.11a is designed for but does not yet have any Application Profiles defined. In order to be interoperable among a wide variety of suppliers, ISA100.11a needs Application Profiles. Without an Application Profile, ISA100.11a is just a means to wirelessly transmit a message of digital data. There is nothing in the specification to specify how the collection of digital data can be interpreted. Adding a Process Automation Application Profile that is based on IEC 62591, WirelessHART ensures end users have a choice of an open and interoperable application layer supported by the 200+ member companies of HCF.

• The timeline to add a Process Automation Application Profile that is based on IEC 62591, WirelessHART aligns to the ISA100.11a Correction/Corrigendum timeline of Nov 30, 2010.

• The existing ISA100.11a draft is going to be revised because a number of issues were reported by an independently commissioned consultants hired by Shell. The current plan is to complete the revision of ISA100.11a by November 2010.

• Preserves ISA100.11a; other application profiles can be added at a later date.

Emerson is committed to working with ISA100 to address convergence between the IEC 62591, WirelessHART global standard and ISA100.11a.

 

Hopefully this will stimulate discussion and ultimately advance the convergence process.

 

-Peter Welander, process industries editor, PWelander@cfemedia.com
Control Engineering Process & Advanced Control Monthly eNewsletter
Register here to select your choice of free eNewsletters .



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me