New safety standards offer opportunity

The new safety standards offer machine builders a chance to be more efficient and more cost-effective as well as safe as the new standards become effective in 2012.

07/26/2011


Safety is definitely one of the buzz words in discrete factory automation at the moment! The new machinery standards, which will be harmonised under the EU machinery directive at the end of 2011, are creating a storm of activity in the market as machine builders and end users that haven’t transitioned already start to panic as there’s only five months to year end. 

Soon to be replaced, EN 954-1 is no longer up to the safety demands of modern complex machinery. Since it was first published in 1997, the factory automation market has changed and networking of components has become the norm. Both of the new standards (EN ISO 13849-1 and EN 62061) provide rules for using PLCs and safety networking technologies; they also offer a quantitative approach to the risk assessment of machinery. This succession is due on 31st December 2011 and will apply to all new and “significantly modified” machinery; in other words, any machine built, modified, or linked to other machinery from January 2012 will need to be reassessed and certified (CE marked) for use.

This change creates an opportunity for machine builders and end users to upgrade their machine safety systems so that they incorporate the most suitable components for their application.  I’m sure there are a lot of companies out there, particularly in EMEA and the Americas, which adopted machine safety systems 10 years ago and are still using something very similar today.  These new directives give these companies the opportunity to reassess the way they approach operator safety.

Could we be using new or different components? Could our safety system be networked? How can safety component suppliers assist in our implementation and planning? Asking (and answering) these questions will help machine builders and end users to find safety solutions that best fit their specific applications, keep operators safe, whilst also ensuring the new standards are met. An added bonus can also be significant cost reductions.

Following our research earlier this year on the discrete machine safety component market it’s clear that integrated components, which are mostly offered by the larger automation suppliers, will play a key role in the future. 

Figure 1: Graph showing the world market for safety PLCs by type (revenue growth profile) from 2010-2015. Courtesy: IMS Research

Figure 2: Graph showing the world market for safety PLCs by type (revenue comparison) from 2010-2015. Courtesy: IMS Research

Integrating standard automation control and safety functionality has a number of advantages. One of the most important, particularly at a time of austerity, is the potential for cost savings. For example, instead of requiring two PLCs – one for machine control and one for safety – an integrated safety PLC can be used for both applications.

Secondly, using integrated safety components makes it easier to network the safety, automation and enterprise systems so that production data is freely available at all levels. This can further help to reduce costs and increase productivity/efficiency. 

Thirdly, as the same software will be used for both the safety system and standard control, machine operators need only be trained to use a single architecture.

Finally, these integrated (and other intelligent discrete safety components) incorporate diagnostics.  It’s therefore much quicker for operators to identify (and hopefully resolve) issues with components so that machine or line shutdown can be avoided.

Machine builders and end users in EMEA and the Americas are likely to take leading roles in the adoption of integrated safety components but Asia will quickly catch-up as the benefits are more widely recognised.    

The implementation of the new safety standards is therefore pushing machine builders and end users to upgrade discrete safety systems before the end of 2011.  However, as we’ve seen by considering integrated components this is actually an opportunity to better protect factory floor operators whilst simultaneously improving line or machine productivity... it’s definitely a win-win!



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me