New ideas, right to your desk at Virtual Summit

The 2009 Plant Engineering Manufacturing Summit was a big hit with attendees, but not all of Plant Engineering’s worldwide audience could take advantage of this year’s event. Now, they can. Join Plant Engineering and industry experts on June 30, from 10 a.m. EDT to 3 p.m. EDT for the Plant Engineering Virtual Manufacturing Summit.

06/01/2009


The 2009 Plant Engineering Manufacturing Summit was a big hit with attendees, but not all of Plant Engineering’s worldwide audience could take advantage of this year’s event.

Now, they can.

Join Plant Engineering and industry experts on June 30, from 10 a.m. EDT to 3 p.m. EDT for the Plant Engineering Virtual Manufacturing Summit. This event is not a typical Webcast; it is a fully interactive virtual event that incorporates online education, learning, live chat, active movement in and out of exhibit booths and sessions, white papers and other collateral resource centers, informative Webcasts and networking opportunities.

In short, it’s all of the experience you might have at the normal trade show, but without any of the tired feet or the travel.

“We believe strongly in the value of meeting our readers and discussing the issues face-to-face. We also know that’s not always possible for everyone,” said Plant Engineering editor Bob Vavra. “Technology has given us this new opportunity to connect directly with our worldwide audience through the Virtual Summit. It also gives everyone a chance to see the outstanding content and presentations we had available with the Manufacturing Summit in Charleston, along with some new events and content that will be unique to the Virtual Summit.”

The Plant Engineering Virtual Summit is sponsored by IBM, Infor and Schneider Electric.

The Virtual Summit will focus on the same four topic areas covered during the Manufacturing Summit:

  • Enterprise Asset Management

  • Energy and Sustainability

  • Workforce Development

  • Plant-To-Enterprise Connectivity.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me