New ASSE book offers math solutions for common problems

Applied Mathematics for Safety Professionals now available

03/17/2010


The American Society of Safety Engineers has published a new book that the association says gives safety professionals a refernce for time-saving solutions to complex problems. Applied Mathematics for Safety Professionals: Tips, Tools and Techniques to Solve Everyday Problems is now available at the ASSE Website, www.asse.org .
Some of the everyday problems and questions safety and health professionals are faced with include queries on circuit power light safety; what rigging is needed to safely lift a load; fugitive emissions from equipment possibly exceeding the PEL; hearing protection requirements for a job; an instrument possibly being excessively unreliable based on its calibration history; and, how many cool-down breaks should be provided to workers inside a hot vessel. This book not only addresses those questions, but is also aimed at helping college and university students prepare for a career in safety engineering by providing exposure to problems they will encounter and the mathematical tools and analysis techniques needed on the job.
This book explains the practical uses of important mathematical concepts in the many fields in which safety professionals work, including ergonomics, ventilation, noise abatement, radiation, thermal stress, hydrostatics and hydraulics, and engineering economy. Chapters on statistics and probability are also included, providing a broad base of equations in each area along with detailed answers to problems. The book's contributing authors' varied backgrounds are in the areas of industrial hygiene, control systems engineering, design engineering, OSHA management, electronics, highly hazardous chemicals and systems analysis.
The book's contributors include Glenn Young, author of ASSE's Background Math for the Board of Certified Safety Professionals' (BCSP) Safety Certification Examinations and consultant in the field of process safety management; Wayne M. LaCombe, MSPH, CSP, an industrial hygiene professional for a petro-chemical facility in Louisiana responsible for industrial hygiene programs; Karen D. Morton, P.E., a control systems engineer with 15 years of instrumentation and controls experience; Andrew Rodgers, Ph.D., CIH, an adjunct professor in the Nunez Community College Department of Science in New Orleans, LA, teaching chemistry and physics; Marta Vasquez, Ph.D., P.E., a design engineer for the Louisiana Department of Transportation and Development who formerly worked for the Louisiana Department of Environmental Quality as an Environmental Chemical Specialist; John Thomas Watkins, M.B.A., B.S., a lead safety engineer and assistant area director, Baton Rouge Area Office of OSHA, who performs and supervises in-depth investigations and inspections in construction, general and maritime industries; Ronald H. Williams, M.S., CSP, CIH, is a principal for EnviroSafe Resources, LLC, providing occupational safety, health and environmental consulting services to a variety of commercial and industrial clients; and, Robert R. Zinn, B.S., CET, who has worked since 1981 providing hardware, software and network support for the Louisiana State University Chemistry Department.
Also contributing to the book were reviewers Walter M. Scott, III, a retired control systems engineer with 28 years of instrumentation and controls experience; C. David Langlois; Matthew Parker; and Professor Gordon McClarren. The ASSE Greater Baton Rouge Chapter also provided guidance and insight.
For more information and to order the book please go to www.asse.org .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me