NERC CIP-013-1 sets sights on utility asset management security

When we talk about security in the 21st century, we’re referring to two different kinds—there’s physical security, as in protection against outside threats that might harm a facility or its assets, and there’s cyber security.


In a Black and Veatch survey, 10.7 percent of utilities organizations said they weren’t prepared for security issues, and worse yet, 21.8 percent said they didn’t know. Courtesy: Smartware GroupWhen we talk about security in the 21st century, we're referring to two different kinds—there's physical security, as in protection against outside threats that might harm a facility or its assets, and there's cyber security.

Both appear to be a source of concern to the utilities industry these days. The provision of North American Electric Reliability Corp. Critical Infrastrucure Protection (NERC CIP-014-1) became effective Jan. 26, 2015, providing a structured framework whereby utilities must identify their most critical assets. Utilities must document all potential threats and risks related to those assets, and then design and execute a comprehensive plan to safeguard the assets. Both the identified assets and protection plan are required to be verified by a third party.

Chip Handley, project manager for power–generation services at Black and Veatch, told Breaking Energy that the government regulations regarding utility asset management security are a step in the right direction, but it might be difficult for organizations to achieve the level of compliance they need.

Security for both large and small utilities

There's been much more emphasis in recent years on ramping up security resources for the utilities industry. In a recent Black and Veatch survey about security, 10.7 percent of companies said they weren't prepared for security issues, and worse yet, 21.8 percent said they didn't know.

It was initially thought that only larger organizations could afford to invest in security, but that mindset is now beginning to change. In reality, utility companies of many sizes can invest at varying levels as they see fit.

"Security planning, both physical security and cyber security, is often influenced by the size of the respondent's organization or customer base," Handley said. "Without a mandate in place, small- to mid-size utilities felt the combination of their limited impact to the grid and the lack of staff to address cyber security concerns justified implementation delay."

Compliance becoming a more serious issue

Under the new provisions handed down from Washington, utility companies are under a great deal of additional pressure to identify security risks and address them quickly.

"Greater awareness of system interconnection is forcing municipally-owned utilities and co-ops that previously had been outside the scope of NERC-CIP to evaluate their network to determine whether they are compliant," Handley said.

More companies than ever—including large, small, public and private utilities—are being forced to meet security standards that weren't on their radar previously. It's a frantic time for the industry at large, as many organizations are scrambling to audit their physical assets. This can require a great deal of money, manpower and logistical legwork.

Single system of record

When it comes to asset management documentation and audit preparation, utilities organizations typically have a ready-made solution at their fingertips with a modern computerized maintenance management system (CMMS). Asset–management functionality, complete with configurable criticality, status categories, conditions and other attributes, can greatly assist with the critical asset–identification process for compliance. Communication is key, of course. By maintaining these attributes within the CMMS and delivering user access across the enterprise, all necessary personnel can best understand the type of security precautions designated for each critical asset—even highlighting these updates through CMMS dashboard messages for particular facilities, users, sites, or other filter options.

Audit capabilities prove useful for unaffiliated third party access, in which organizations can leverage an add-on occupational safety & health (OSH) CMMS solution to track date/time/user/modification logs, inspection schedules, and historical record keeping.

Every business these days needs to do something about security, and the utilities industry is certainly no different. By tapping into the go-to system of record, organizations can extend their well-designed CMMS beyond typical corrective and preventive maintenance to drive greater compliancy and build a safer structure for all stakeholders.

—This article originally appeared on the Smartware Group blog. Smartware Group is a CFE Media content partner. Edited by Erin Dunne, production coordinator, CFE Media,

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me