NEMA publishes safety standard

ANSI Z535.2-2007 American National Standard for Environmental and Facility Safety Signs contains requirements for safety signs to be used to alert individuals of the existence of potential hazards to personnel or property in the environment or in facilities, the nature and potential severity of the hazard, and the steps to be taken to avoid the hazard.

11/30/2007


The National Electrical Manufacturers Association has published ANSI Z535.2-2007 American National Standard for Environmental and Facility Safety Signs . The publication contains requirements for safety signs to be used to alert and inform viewers of the existence of potential hazards to personnel or property in the environment or in facilities, the nature and potential severity of the hazard, and the steps to be taken to avoid the hazard.
According to Allen Clapp, chairman of Subcommittee Z535.2 on Environmental and Facility Safety Signs, the document also includes requirements for signs describing safety procedures, the location of safety equipment, and directional arrows used to alert viewers of safe locations or safety equipment. The requirements cover both fixed signs and larger, movable signs that are sometimes used on large industrial sites with changing conditions.
“This edition helps users differentiate hazards that are likely to result in personal injury from hazards likely to result only in damage to facilities,” Clapp said. “The safety sign formats in this standard are consistent with those of ANSI Z535.4 for product safety signs and labels, and ANSI Z535.5 for temporary safety tags and barricade tapes. This standard, however, appropriately reflects the different requirements for environmental and facility safety signs to alert viewers at greater distances, so that they may avoid entering %%MDASSML%% or take appropriate cautions before entering %%MDASSML%% the location containing the hazard.”
The standard incorporates a new annex to help users estimate and evaluate risks from potential hazards in the environment or in facilities, and select the appropriate alerting signal word and sign format consistent with the type and degree of hazard. Updated references also help users design effective, efficient safety signs.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me