NEMA lauds anti-counterfeiting legislation

10/11/2005


The National Electrical Manufacturers Association (NEMA) announced its support for legislation sponsored by Senator Arlen Specter (R-PA), Senator Patrick Leahy (D-VT) and ten other co-sponsors that would amend U.S. criminal code provisions imposing sanctions on traffickers in counterfeit products, as well as those who traffic in counterfeit labels and packaging. “The Stop Counterfeiting in Manufactured Goods Act” (S.1699) was introduced on September 14, 2005 and mirrors legislation passed by the House of Representatives in May.

The legislation would amend the law prohibiting trafficking in products bearing counterfeit trademarks in two important ways:

1. It would clarify that criminal sanctions apply not only to those who traffic in goods bearing counterfeit marks, but also those persons who traffic in counterfeit trademarks and certification marks themselves. This amendment would overrule a 2000 Tenth Circuit Court of Appeals decision, United States v. Giles, which overturned the conviction of a person operating a business known as Fabulous Fakes, which supplied patches bearing counterfeit marks so that consumers could affix them to generic products.

2. It would make forfeiture and destruction of the counterfeit product mandatory rather than discretionary, and would authorize a court to order the forfeiture of the proceeds made from the sale of the counterfeit product, as well as the tools used to make counterfeit products and marks, after considering certain specified factors. This amendment would make the law applicable to counterfeit trademarks equal to existing law relating to counterfeit copyrighted products.

“NEMA is pleased that Senators Specter and Leahy recognize that fighting the counterfeiting problem is a bipartisan issue,” said NEMA’s President Malcolm O’Hagan. According to O’Hagan, NEMA was particularly concerned about the impact of the Court of Appeals decision that held the anti-counterfeiting law did not apply to those who sold fake trademarks, even though they knew full well the use for the fake marks. “In the case of electrical products,” he said, “we know that unbranded products such as Christmas tree lights have been imported into the United States, where the importer has arranged to purchase counterfeit UL marks to affix them to the lights prior to distribution. Both UL and the Consumer Product Safety Commission found these counterfeit products to be unsafe.”

NEMA officials were also pleased that the bill would give parity in the mandatory forfeiture remedy between those who traffic in counterfeit trademarks and those who engage in copyright piracy. Currently, only the copyright law makes forfeiture of counterfeit product mandatory. “Not only is this amendment important for domestic law,” O’Hagan said, “but it enables the United States to encourage our trading partners to adopt this kind of remedy.”





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me