NEMA index shows decline in economic growth, industrial control prospects

11/08/2006


The National Electrical Manufacturers Association’s Primary Industrial Controls Index fell 2.8% between the second and third quarter of 2006. This marks the second consecutive quarter-to-quarter decline in the index since the second half of 2002. Conditions have clearly cooled down from the torrid pace of last year as the topline index dropped 0.1% on a year-over-year basis, which represents the first such decline in three years. A broader measure of demand for industrial controls, the Primary Industrial Controls and Adjustable Speed Drive Index, also contracted during the third quarter of 2006, falling 1% from the prior quarter. However, trend growth in the broader industrial controls market remains positive, given the index’s 3.2% gain vs. the third quarter of 2005.

A declining housing industry helped to push overall economic growth lower in the third quarter of 2006, while some other signals have emerged to suggest that the slower growth pace is spreading to the industrial sector. For example, although it continues to point to expansionary conditions, the ISM Index dropped to its lowest point in more than three years due to survey respondents reporting slower growth in production and new orders of manufactured goods. Meanwhile, the Sept. 2006 report on industrial production showed that manufacturing output declined by the fastest pace since last year’s Hurricane Katrina-induced nose dive and that the sector’s softness was fairly broad-based. Even the electroindustry, which has seen robust growth over the past few years, is softening somewhat as NEMA’s Electroindustry Business Confidence Index (EBCI) posted another reading below 50, indicating the sector is no longer expanding.

Despite these emerging signs of weakness, an economic recession is improbable, according to NEMA. Instead, the U.S. economy is likely transitioning into a stage characterized by a slower, more sustainable rate-of-growth. In addition, the backdrop for business capital spending %%MDASSML%% record corporate profits and strong replacement demand %%MDASSML%% should allow demand for industrial controls and adjustable speed drives to expand modestly going forward. For example, factory orders of “core” capital goods, which includes industrial control equipment, increased 13% on an annualized basis during the third quarter of 2006, while unfilled orders of these goods surged at an 18% annualized rate. Both of these indicators likely suggest that some additional demand for capital equipment, including industrial controls and adjustable speed drives, remains in the pipeline.

The Industrial Control Business Indices are issued quarterly by NEMA. The Primary Industrial Control Index represents U.S. shipments for motor starters, contactors, terminal blocks, control circuit devices, motor control centers, sensors, programmable controllers and other industrial control devices. Because this data has been collected for some time, the primary index illustrates the market’s trend over several years. In 2001, the NEMA data collection program was expanded to include adjustable speed drives, a key energy-saving industrial component. The Primary Industrial Control and Adjustable Speed Drive Index provide a broader measure of the industrial control marketplace. Industrial control equipment, a $2.6 billion U.S. market, is primarily used in industrial applications for the control or regulation of power utilization apparatus, including motors.

www.nema.org





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me