NAM economist: Higher winter heating bills slowing growth, recovery

High winter heating bills have a chilling effect on economic growth, according to the 2006 National Association of Manufacturers' 2006 economic forecast. First quarter growth is expected to slow to 2.6%, the lowest rate since the first quarter of 2003. "Though the impact of heating bills will abate in the spring, the impact of historically high natural gas prices will continue to impact manufac...

02/01/2006


High winter heating bills have a chilling effect on economic growth, according to the 2006 National Association of Manufacturers' 2006 economic forecast.

First quarter growth is expected to slow to 2.6%, the lowest rate since the first quarter of 2003. "Though the impact of heating bills will abate in the spring, the impact of historically high natural gas prices will continue to impact manufacturing," said NAM Chief Economist David Huether. "There is a world price for oil, but not for natural gas. The continuing failure of Congress to authorize development of more natural gas resources in the Arctic National Wildlife Reserve and the Outer Continental Shelf poses a long-term challenge to U.S. manufacturing."

Huether said the interruption of energy supplies caused by last year's hurricanes had served primarily to exacerbate the nation's energy vulnerability. Four months after Hurricane Katrina made landfall, 27% of oil production and 20% of natural gas production in the gulf still remain shut down. "We anticipate that the domestic energy production impacted by the hurricanes will not be fully back online until the second quarter of 2006," Huether said. "At this time, energy prices should begin to moderate. This, coupled with reconstruction efforts in the Gulf Coast areas, will then give the economy a boost."

Huether projected that the overall economy will pick up speed later in the year posting a growth rate of 3.6% over the remaining three quarters of 2006. "While this is a respectable pace, it constitutes a deceleration from the 4.1% average pace since the first quarter of 2003, mainly due to a downturn in housing," he said. "After growing by just 2% in the first quarter, manufacturing production will accelerate to 5.4% growth for the duration of the year due to solid consumer spending and business investment, particularly in computers and software."

"However, the outlook is not without risk," Huether said. "When hurricane season returns, we face the prospect of future interruptions of energy supplies."

The 2006 NAM Economic Forecast is at at www.nam.org/economicoutlook2006 .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me