NAM calls for new approach to boost skilled workforce


In a Labor Day report on the state of U.S. manufacturing, the National Association of Manufacturers called for a three-pronged approach to making American manufacturing more competitive in a global marketplace by improving education, attracting more skilled workers internationally and increasing funding for research and development.

Acknowledging the uncertainty of the manufacturing job market after the loss of 3 million industry jobs in the last four year, the NAM report said, “if we are to alleviate this anxiety, keep our economy strong and successfully compete in the fiercely competitive international race to the top, we must recommit our nation to innovation and the concerted development of a more highly educated and skilled workforce.”

The NAM report, Preparing American Workers for 21stCentury Competition, (available for review at, cited three steps needed to improve U.S manufacturing’s position in the marketplace:

  • Improve secondary science and math teaching

    • “One reason U.S. students under perform in math and science and are less likely to pursue post-secondary education in these disciplines is that there is a large disconnect in this country between the public education system and career opportunities that exist later on in life,” the report stated. “Together, our nation must initiate a campaign to educate students and teachers about the importance of science and math to individual success and to the types of careers available through excellence in these fields.”

      • Reform visa and immigration policies

        • By streamlining the process for foreign-born workers with advanced degrees from U.S. universities to obtain permanent residence status, NAM believes it will retain more American-trained workers. “Current demand greatly exceeds supply,” the report stated. “The United States should continue its longstanding history of welcoming talented foreign students to study at our nation’s universities.”

          • Increase federal support for basic research

            • “Agencies such as the National Science Foundation, the National Institute for Standards and Technology and the Energy Department’s Office of Science perform valuable research that can spur economic growth for generations,” the report noted.

              “Without an educated and highly skilled workforce to drive 21stcentury innovation, America’s capacity to remain the world’s most advanced economy will be jeopardized,” the report concluded. “Other countries are running all out to close the innovation gap and, if we do not develop and implement a concerted national strategy to do the same, we will risk falling behind in our global economy’s fiercely competitive race to the top.”


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me