MTTR can cause reliability problems if not used right

The use of mean time to repair (MTTR) to improve reliability can cause problems if it’s used alone, in immature organizations, or if it’s used without an understanding of the potential problems it can use.

10/31/2016


Metrics, also called key performance indicators (KPI), are a force for good when used at the right time and with the right complementary or supporting elements. When they are used at the wrong time, however, they can have unintentional consequences or drive the wrong behaviors. In particular, the use of mean time to repair (MTTR) to improve reliability can cause problems if it's used alone, in immature organizations, or if it's used without an understanding of the potential problems it can use.

This metric can drive an organization in the opposite direction of the world-class performance that may have been intended. If the organization is immature from a reliability standpoint and chooses MTTR as the focus, then the company is setting itself to become very reactive by very quick to respond to failures. The problems with that include:

  • Reactive response is at least five times more expensive than planned and scheduled work.
  • Operations will demand faster response time to lower MTTR.
  • Rushed repairs are less reliable.
  • Reactive response requires more expensive spare parts stocking.
  • Companies will have skilled maintenance technicians just standing on the manufacturing floor doing nothing and waiting for a failure to occur.
  • Pressure to make the repair as quickly as possible can lead to taking elevated safety risks.

Many sites that choose MTTR as a primary metric early in their reliability journey create a brigade of firefighters at the ready with crash carts and mounds of spare parts. In general, though, companies want to prevent the failures from happening at all or at least reduce the frequency. Metrics such as mean time between failures (MTBF) might be a better option early on in the process and then use MTTR after the reliability has been increased. Using MTTR later allows companies to address issues that can't be prevented and help managers understand training gaps and other issues that might be affecting repair times.

Shon Isenhour, principal at Eduditio, LLC.If MTTR is the only metric being used, then companies will create tools like crash carts and quick response teams (QRT) instead of using tools such as root cause analysis (RCA) to understand and eliminate the reoccurring problem. If your metrics are driving the wrong behaviors, then it might be time to do a reassessment.

What metrics have worked for your company? Let us know in the comments section below.

- Shon Isenhour is a founding partner at Eruditio and is a part of Plant Engineering's editorial advisory board. This article originally appeared on Eruditio's blog. Eruditio is a CFE Media content partner. Edited by Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me