Michigan engine plant earns top environmental award

Keep Michigan Beautiful, Inc. annually recognizes programs and activities that substantially contribute to environmental improvement, beautification, site restoration and historical preservation.

11/12/2010


Chrysler Group LLC's Trenton, MI South Engine Plant was presented with The Michigan Plaque in recognition of the plant's landscaping enhancements, helping make it one of the most environmentally-friendly facilities in the world. The Michigan Plaque is awarded by Keep Michigan Beautiful, Inc., a non-profit organization that encourages the improvement of environmental quality across the state.

Trenton South, which builds the all-new Pentastar V-6 engine, was designed for both efficient manufacturing and minimal environmental impact. Built on a brownfield site (abandoned or underused industrial and commercial areas available for re-use), the facility was constructed to embrace the highest environmental standards to address the complete lifecycle of the complex. Carefully-selected native trees, bushes and grass were placed around the facility to help cool the building and were specifically chosen because they require less water.

"The Trenton South Engine Plant continues to lead the way in efficient, eco-friendly designs both inside and out," said Scott Garberding, senior vice president and head of manufacturing, Chrysler Group LLC. "As a company, we are very proud of this plant. This award is a reflection of the attention to detail that we are designing not only into our plants, but into every vehicle that we build."

Keep Michigan Beautiful, Inc. annually recognizes programs and activities that substantially contribute to environmental improvement, beautification, site restoration and historical preservation. Approximately 10 recipients are presented with The Michigan Plaque every year.

"We are honored to have been recognized by Keep Michigan Beautiful, Inc. on our environmental contributions to the state and the planet," said Don DeKeyser, Trenton South plant manager. "World Class Manufacturing is a system designed to eliminate waste and that's precisely what we demonstrate at this facility."

The Michigan Plaque is the second award received by the Trenton South plant for its environmentally-friendly design. In March, the facility was recognized with LEED (Leadership in Energy and Environmental Design) Gold Green Building System certification for meeting the highest environmental standards. It is one of only four auto manufacturing facilities to receive a LEED rating of any kind and the only engine manufacturing facility in the world to achieve Gold status.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me