Metalforming business seen slowing, PMA report says

Metalforming companies anticipate a dip in business during the next three months, according to the April 2012 Precision Metalforming Association Business Conditions Report.

04/20/2012


Metalforming companies anticipate a dip in business during the next three months, according to the April 2012 Precision Metalforming Association Business Conditions Report, The monthly report samples 129 metalforming companies in the United States and Canada.

Metalforming, Courtesy: Gilchrist Metal FabricatingThe April report shows that 37% of participants expect economic activity to improve during the next three months (down from 46% in March), 51% predict that activity will remain unchanged (compared to 49% last month) and 12% report that activity will decline (up from 5% in March).

“The strength of PMA member expectations for the general economy and specifically for shipping levels and incoming orders for the next three months softened somewhat in the April PMA Business Conditions Report,” said William E. Gaskin, PMA president. “However, expectations thus far in 2012 are significantly higher than expectations in all but the first quarter of 2011.

“Uncertainty over the strength of the economic recovery, the unsettled political situation brought on by election-year politics, and the increasing difficulty being experienced by many companies in hiring skilled workers, all are conspiring to soften what continues to be a very strong recovery in the metalforming sector,” Gaskin added. “This recovery is consistent with the overall rebound in manufacturing that has been widely reported in the automotive, agriculture, off-highway, medical equipment and other sectors.”

Metalforming companies also anticipate a downward trend in incoming orders during the next three months, with 43% forecasting an increase in orders (compared to 47% in March), 41% expecting no change (down from 47% in March) and 16% predicting a decrease in orders (up from only 6% last month).

Average daily shipping levels declined in April. Only 46% of participants report that shipping levels are above levels of three months ago (down from 53% in March), 41% report that shipping levels are the same as three months ago (compared to 37% last month), and 13% report a decrease in shipping levels (up from 10% in March).

The percentage of metalforming companies with a portion of their workforce on short time or layoff increased to 9% in April, from 7% in March. However, this number is lower than April 2011, when managers reported 11% of their workforce on short time or layoff



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me