Metalforming business on the rise

PMA report shows an order spike is on the horizon.

01/26/2012


According to the January 2012 Precision Metalforming Association (PMA) Business Conditions Report, metalforming companies predict improved business conditions during the next three months. Conducted monthly, the report is an economic indicator for manufacturing, sampling 132 metalforming companies in the United States and Canada.

The January report shows that 41% of participants expect economic activity to improve during the next three months (up from 33% in December 2011), 54% predict that activity will remain unchanged (compared to 57% last month) and only 5% report that activity will decline (down from 10% in December).

Metalforming companies also expect a spike in incoming orders during the next three months, with 51% anticipating an increase in orders (up from 40% in December), 40% forecasting no change (compared to 48% last month) and only 9% predicting a decrease in orders (down from 12% in December).

Average daily shipping levels improved in January. Thirty percent of participants report that shipping levels are above levels of three months ago (up from 25% in December), 48% report that shipping levels are the same as three months ago (compared to 44% last month), and 22% report a decrease in shipping levels (compared to 31% in December).

The percentage of metalforming companies with a portion of their workforce on short time or layoff remained unchanged at 12% from December 2011 to January 2012. The percentage matches data reported one year ago, in January 2011.

“The metalforming industry continues to exhibit a positive outlook for 2012, despite the uncertainties created by the lack of political willpower in Washington, D.C., in Congress and the Administration, to address fundamental issues such as taxes, labor law changes and a wide range of growing regulatory obstacles that impact manufacturing,” said William E. Gaskin, PMA president. “Data from PMA’s 2011 Orders and Shipments Survey peg 2011 calendar year growth for new orders at 8 percent vs. 2010, with shipments up year-over-year by 11 percent compared to 2010. Based on PMA’s January Business Conditions Report, the first quarter of 2012 will provide a strong start to the year, consistent with the underlying strength in manufacturing which is helping to lead a slow, steady economic recovery.”

The monthly Business Conditions Report has been conducted by PMA since 1979. Full report results are available at pma.org/public/business_reports/pdf/BCREP.pdf.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me