Metalformers see growth in 2013… but the cliff looms

PMA calls for swift action to resolve federal fiscal crisis

12/19/2012


The December Business Conditions Report from the Precision Metalforming Association indicates modest optimism among members. Looming on the horizon, and on the minds of the 126 members of the PMA’s report sample, is the “fiscal cliff” crisis in Washington, and association leaders called for swift action to resolve that issue.

The December PMA report found 22% of participants believe that economic activity will improve during the next three months, up from 19% in November. Another 49% predict that activity will remain unchanged, also up from the previous month’s level, while just 29% expect activity will decline.

Part of that optimism is built around an increase in orders in November. Over the next three months, one-third of metalforming anticipated an increase in orders, up from 28% in November.

The one darker cloud in the statistics is the percentage of metalforming companies with a portion of their workforce on short time or layoff. That figure stayed at 17% in December, the same level as November, and five percentage points higher than the 2011 report.

PMA president William Gaskin balanced the good news against the concerns of the association members. “There is significant uncertainty in the manufacturing sector being caused by the looming fiscal cliff in areas such as personal/corporate tax rates, availability of the R&D Investment Tax Credit and depreciation rules for investment in new equipment,” said Gaskint. “The average PMA member company has experienced 6% growth in orders and shipments for the first 11 months of 2012 vs. 2011, so most have had an okay year and should be poised to continue investing.

“However, uncertainty about how the President and Congress will resolve the tax and spending issues that stand in the way of continued economic recovery has them far more pessimistic than they were at this time last year. PMA calls on President Obama and the leadership of the U.S. House of Representatives and U.S. Senate to quickly resolve these political issues so the manufacturing sector can create new jobs and provide economic certainty for its employees.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me