Merchant power supply market to grow to $29 billion in 2016

Growth in the merchant power supply market was curtailed in the second half of 2011 by continuing economic problems.

08/30/2012


IHS has acquired IMS ResearchGrowth in the merchant power supply market was curtailed in the second half of 2011 by continuing economic problems. Despite this, the market grew by 6.5%; however, this was just two-thirds of the growth initially projected in the first half of the year. IMS Research, recently acquired by IHS Inc., projects a strong 2012, with revenue growth forecast to reach 9.3% according to its latest report analysing the ac-dc and dc-dc merchant power supply markets.

The strong revenue growth forecast for 2012 will drive the market to a total of almost $23 billion. IMS Research projects positive growth annually through 2016, although at a slower rate owing to the impact that adoption of the Wired Universal Charging Solution for cell phones is predicted to have on the overall market beginning in 2014. According to the report, the three fastest growing markets for power supplies over the next five years will be lighting, tablet PCs and storage (for servers). The lighting market in particular is forecast to grow rapidly due to the widespread adoption of LED lighting.

Report author and market analyst Jonathon Eykyn commented: "Although these three applications only account for a calculated 0.6% of the market in 2012, IMS Research forecasts that they will outperform the rest of the market by some margin. In 2016 we project they will account for 15.1% of the total market and provide an opportunity manufacturers cannot overlook."

The individual global market rankings for the top six merchant power supply manufacturers remained unchanged in 2011, although collectively they grew slightly slower than the overall market. Out of the top ten suppliers, seven were Asian, two were American and one was European. GE Energy (through its acquisition of Lineage Power) and ZTE were new entries to the top ten global ac-dc and dc-dc market rankings and ZTE is the first Chinese supplier to make the list.

Eykyn added, "The Chinese merchant power supply market is forecast to overtake the North American market in 2014 to become the largest market in the world. This means that it is likely that we’ll see more Chinese suppliers follow ZTE into the top ten."

The report The World Market for AC-DC and DC-DC Merchant Power Supplies – 2012 Edition builds on more than 10 years of research on the merchant power supplies market by IMS Research. This year’s edition continues to provide a detailed and unbiased assessment of the ac-dc and dc-dc merchant power supply market. The study quantifies the total market for commodity ac-dc power supplies, non-commodity ac-dc power supplies and dc-dc converters. It is also provides breakdowns by major region, application, package type, power rating, sales channel as well as many more.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me