Medium voltage switchgear Webcast: Your questions answered

Jeff Jordan, offer manager for metal-enclosed products, Schneider Electric, answered additional questions on how to increase reliability and decrease cost from the Oct. 6 webcast on medium-voltage switchgear.


Jeff Jordan, offer manager for metal-enclosed products, Schneider Electric. Courtesy: Schneider ElectricJeff Jordan, offer manager for metal-enclosed products, Schneider Electric, answered additional questions on how to increase reliability and decrease cost from the Oct. 6 webcast on medium-voltage switchgear.

Question: Any thoughts on the need for proper PPE for employee safety?

Answer: Schneider Electric recommends consulting the NFPA 70E standard for the selection of personal protective equipment (PPE) based on the particular Incident Energy calculation of any given installation. Each installation is different.

Q: Are the CPT's and PT's are fused separately?

A: Yes, the HVL/cb fixed breaker includes traditional voltage transformers. By the code, these must have fuses. Our design accommodates up to 5 fuses. That's enough for 3 individual phases of a Wye PT configuration and 2 more for the control power transformer (CPT).

Q: Are arc flash lowering components available?

A: Yes, there are several methods to detect and mitigate an arc flash. All Square D by Schneider Electric medium voltage breakers interrupt in 3-cycles, which is within 50 ms (as compared to 100 ms for comparable switchgear). Since incident energy is a function of the duration (time) of the arc, faster breakers significantly lower the risk. Additionally, arc flash relays and arc resistant enclosures are offered in both fixed or withdrawable switchgear.

Q: For 10-year PM's, is Schneider saying that breakers will not need to be exercised for 10 years?

A: The maintenance interval is 10 years for our new generation of fixed breaker switchgear. This is the amount of time between scheduled outages for inspection of the components inside the switchgear. In addition, Schneider Electric recommends exercising the breaker, by opening and closing it, at least one time each year. This activity, which does not require access to the inside of the switchgear, will help ensure that it is ready to trip on demand in the event that it is called upon to do so.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me