Media players, PCs, displays drive nearly $5 billion in revenue for digital signage

Hardware supporting digital signage such as media players, PCs, displays and LED video arrays generated nearly $5.5 billion in revenue during 2011, according to IMS Research.

06/29/2012


IMS Research, recently acquired by IHS Inc., estimates that hardware supporting digital signage such as media players, PCs, displays and LED video arrays generated nearly $5.5 billion in revenue during 2011. The new IMS Research study, The World Market for Digital Signage – 2012 Edition, also forecasts continued growth for this equipment at a combined compound annual growth rate (CAGR) of 8.5% through 2016.

Displays continue to drive the majority of shipments and revenues for the industry when cinema projectors are excluded. IMS Research estimates that during 2011, LCD and plasma displays shipping worldwide for digital signage generated revenues of nearly $2.7 billion, representing 22.5% growth over 2010. Contributing to this strong growth was an increase in shipments for screens smaller than 30 in., replacement of CCFL with LED backlit and thin bezel displays, as well as an increased demand for touchscreens. LED video display (or module) revenue grew due to increased investment in sporting venues and outdoor digital advertising. Media players and PCs contributed nearly $1 billion.

Shane Walker, author of the study and director of IMS Research’s Consumer Electronics Group, stated: “While screen sizes around 42 in. continue to comprise the majority share of screens, we expect sizes over 50 in. to increase to a 27% share due to increased usage in verticals such as airports and retail. Smaller screen sizes are also experiencing increased uptake in the restaurant, education and hospitality verticals. These small screens increasingly have built-in media players with Ethernet or Wi-Fi connectivity.”

Regarding media players and PCs, Walker continued: “In general, there is a trend toward smaller form factors for PCs, with many manufacturers designing units intended to be embedded within a display. Amongst the display manufacturers we spoke with, a common rate of share for displays with a PC expansion slot was 15% to 20% of their product line. Some reported PC attach rates into these displays above 10%.”

Thin bezel share (bezels less than 9 mm) increased to 13% in 2011 from 5% in 2010. Similar to growth expectations for larger screen sizes, IMS Research forecasts this share to increase to 23% by 2016, especially as the cost differential continues to narrow. A contributor to this growth will simply be the replacement of existing wide or narrow bezel video walls with thin bezel displays. Despite these growth expectations, thin bezel display shipments will remain minor through the forecast. This is due to the fact that 50% of digital signage sales still come from SMBs with limited need for video walls. Similarly, large format touch screen share grew to 9% during 2011. IMS Research expects significant growth to continue during 2012.

The World Market for Digital Signage – 2012 Edition is IMS Research’s third edition study on the digital signage market and is the most comprehensive analysis of the industry available. This edition features updated forecasts for displays (including LCD, PDP, OLED and LED video), media players, PCs, software, digital cinema projectors, M2M cellular modules, touch-enabled displays (in both large and small formats), installation services, installation management, and advertising revenues. New to this edition is the inclusion of NFC-enabled cellular handsets, which are forecast for use primarily in payment and ticketing applications, and gesture recognition as an advanced UI for displays. Historical data is presented for 2011 along with forecasts through 2016 for all equipment, software and advertising revenue.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me