Market for GaN, SiC power semiconductors set to rise by factor of 18 from 2012 to 2022

Worldwide revenue from sales of SiC and GaN power semiconductors is projected to rise to $2.8 billion in 2013.

05/20/2013


IMS Research (acquired by IHS, Inc.)The emerging market for silicon carbide (SiC) and gallium nitride (GaN) power semiconductors is forecast to grow a remarkable factor of 18 during the next 10 years, energized by demand from power supplies, photovoltaic (PV) inverters and industrial motor drives.

Worldwide revenue from sales of SiC and GaN power semiconductors is projected to rise to $2.8 billion in 2013, up from just $143 million in 2012, according to a new report entitled "The World Market for SiC & GaN Power Semiconductors - 2013 Edition" from IMS Research, now part of IHS. Market revenue is expected to rise by the double digits annually for the next decade, as presented in the attached figure.

SiC Schottky diodes have been around for more than 10 years, with SiC metal-oxide semiconductor field-effect transistors (MOSFET), junction-gate field-effect transistors (JFET) and bipolar junction transistors (BJT) appearing in recent years. In contrast, GaN power semiconductors are only just appearing in the market.

GaN is a wide bandgap material that offers similar performance benefits to SiC but has greater cost-reduction potential. This price/performance advantage is possible because GaN power devices can be grown on silicon substrates that are larger and lower in cost compared to SiC.

Source: IMS Research (acquired by IHS, Inc.)

"The key factor determining market growth will be how quickly GaN-on-silicon (Si) devices can achieve price parity and equivalent performance as silicon MOSFETs, insulated-gate bipolar transistors (IGBT) or rectifiers," said Richard Eden, senior market analyst for power semiconductor discretes and modules at IHS. "IHS expects this will be achieved in 2019, driving the GaN power market to pass the $1 billion mark in 2022."

SiC Schottky diode revenue exceeded $100 million in 2012, making it the best-selling SiC or GaN device currently. But even though SiC Schottky diode revenue is forecast to grow until 2015, it will decline when lower-priced 600-V GaN diodes become available. Still revenue will recover to approach $200 million by 2022, with sales concentrated at voltage ratings of 1200V and above.

By then, SiC MOSFETs are forecast to generate revenue approaching $400 million, overtaking Schottky diodes to become the best-selling SiC discrete power device type. Meanwhile, SiC JFETs and SiC BJTs are each forecast to generate less than half of SiC MOSFET revenues at that time, despite their likelihood of achieving good reliability, price and performance. End users now strongly prefer SiC MOSFETs, so vendors of SiC JFETs and BJTs have a major task ahead in educating their potential customers on the benefits of these technologies.

While IHS predicts strong growth for the SiC and GaN power semiconductor market in the years ahead, the forecast has been significantly reduced compared to the outlook from one year ago.

The main reason for the change is the reduced forecasts for shipments of equipment that use power components, resulting from today’s gloomier view of the global economy. SiC adoption forecasts also have been slashed because device prices are not falling as fast as originally assumed a year ago.

In contrast, industry confidence in GaN technology has increased, with more semiconductor companies announcing GaN development projects. For instance, Transphorm has become the first company to achieve JEDEC qualification for its GaN-on-Si devices.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me