MAPI report: Manufacturing recovery still a work in progress

03/04/2010


A number of positive trends are emerging as the United States digs itself out of the recession, but there remain cautionary signals that growth will be muted and the rebound restrained, according to a new report.
The Manufacturers Alliance/MAPI Quarterly Economic Forecast predicts that inflation-adjusted gross domestic product will experience 2.8% growth in 2010, followed by 3% growth in 2011. By supplying major assumptions for the economy and running simulations through the IHS Global Insight Macroeconomic Model, the Alliance generates unique macroeconomic and industry forecasts.
A number of factors are in play during the recovery: the consumer, though still burdened by feeble income and job growth, will receive some relief via transfer payments and tax cuts that in turn will boost spending; parts of investment-most notably in transportation equipment, information technology, and residential housing-will increasingly provide the demand surge needed to sustain production growth; the swing in business inventories will provide growth momentum as firms reduce destocking and eventually rebuild inventories; and federally funded stimulus outlays will contribute to the government spending stream through 2011.
"The overall economy grew in the third and fourth quarters of 2009 and high frequency data point to moderate economic performance in the first quarter of 2010," said Daniel J. Meckstroth, Manufacturers Alliance/MAPI Chief Economist. "Similarly, manufacturing production hits its trough in June 2009 and has increased over 5% through January 2010. A moderate recovery is undoubtedly under way, but it is the pace of future near-term growth that is questionable.
"We believe that consumers will continue to deleverage and that the previous growth model based on credit availability to marginally creditworthy borrowers is not repeatable. Government tax cuts have replaced lost income for the moment, but eventually spending has to be grounded on wage increases and employment growth. A jobless recovery is not an option in this cycle."
Manufacturing production growth declined 11.2% in 2009. It is expected to rebound to 5.4% growth in 2010, and 5.3% more growth in 2011.
Production in non-high-tech industries is expected to increase by 3.3% in 2010 and by 4.8% in 2011. High-tech manufacturing production is anticipated to improve significantly, with solid 14.6% growth in 2010 followed by robust 17.8% growth in 2011.
The forecast for inflation-adjusted investment in equipment and software is for 9.4% growth in 2010 and for 12.1% growth in 2011. Capital equipment spending in high-tech sectors will continue the improving trend. Inflation-adjusted expenditures for information processing equipment are anticipated to rise by 8.1% in 2010 and to increase by 6.7% in 2011.
MAPI expects industrial equipment expenditures to improve by 6% in 2010 and by 17% in 2011. The outlook for spending on transportation equipment is for a healthy 50.1% increase in 2010 and a 33.6% advance in 2011. These figures should help compensate for a 48.7 decline in 2009.
Spending on non-residential structures is the lone GDP expenditure category expected to retrench in each of the next two years, declining by 14.6% in 2010 before decreasing further, by 6.2%, in 2011.
Exports and imports will both be trending upwards. Inflation-adjusted exports are anticipated to improve by 9.2% in 2010 and 7.6% in 2011. Imports are expected to grow by 9.6% in 2010 and by 6.8% in 2011.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me