Manufacturing’s slowing, solid growth continues

05/18/2006


Growth in the U.S. economy is expected to decelerate in the next two years, but the manufacturing sector should continue its solid climb through 2006 before experiencing some retrenchment in 2007, according to a new report.

The Manufacturers Alliance/MAPI Quarterly Economic Forecast predicts inflation-adjusted gross domestic product (GDP) growth will be 3.3% in 2006 and 2.7% in 2007, nearly consistent with the February 2006 projections of 3.2% and 2.8%, respectively. Overall U.S. GDP growth in 2005 was 3.5%.

“Factors that would lower the forecast, such as higher than expected energy prices and long- term interest rates, have been offset by stronger international growth and a lower than expected value of the dollar,” said Daniel J. Meckstroth, Manufacturers Alliance/MAPI chief economist.

Growth in manufacturing activity will likely outpace the general economy in 2006 but trail it in 2007. The Alliance expects manufacturing industrial production to increase a robust 4.6% in 2006, before returning to a more modest 2.5% increase in 2007. Manufacturing activity increased 3.9% in 2005. Inflation-adjusted spending for computers and electronic products is forecast to rise 17.1% in 2006 and 12.0% in 2007. Production in non-high-tech industries will grow 3.5% this year and 1.4% in 2007.

“Manufacturing is benefiting from faster economic growth abroad and continued moderately strong domestic demand,” Meckstroth said. “The stronger international activity, coupled with a slightly lower dollar, helps increase exports and tightens up product availability. Manufacturing capacity utilization is rising, vendor deliveries are slower, and commodity prices continue to skyrocket.”

Real investment in equipment and software should increase 10.1% in 2006 and 5.5% in 2007, growing several times faster than the general economy. The largest gains in spending will come in the high-tech sectors. Inflation-adjusted expenditures for information processing equipment are expected to rise 11.5% in 2006 and 9.7% in 2007. Spending for transportation equipment, however, will be volatile over the next two years, with Alliance predictions of 11.7% growth in 2006, but a decrease of 1.9% in 2007. The forecast calls for industrial equipment spending to increase 7.7% and 3.2%, respectively. Spending on non-residential structures is forecast to rise 7.0% this year and 7.5% in 2007.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me