Manufacturing’s biggest stage needs the U.S. message

With high productivity, low energy prices and sophisticated leadership, the United States continues to lead the world in manufacturing output… Now is not the time to rest on that accomplishment. It’s time to double down on U.S. manufacturing’s role as a world leader.

05/05/2015


Bob Vavra, content manager, Plant EngineeringIf you're a golfer, you dream of teeing it up at the U.S. Open. If you're a singer, you'd want to audition for American Idol. If you're a whiz in the kitchen, you'd probably enjoy competing on Top Chef, especially if you enjoy being yelled at by Gordon Ramsay.

No matter what you're good at, you want to show off your talent on the biggest stage possible. For manufacturing, there is no bigger stage than Hannover Messe, and there is going to be no bigger year for U.S. manufacturing to showcase itself on the biggest stage than 2016. In just 11 months, the United States will be the Partner Country at Hanover Messe 2016, the first time in 20 years the U.S. has held this designation and the first time a U.S. president is expected to speak at the fair's opening ceremony.

India was the 2015 Partner Country at Hannover Messe, and Indian Prime Minister Narendra Modi used his speech at the opening ceremony last month to make an impassioned case for how and why manufacturers should look to expand their business into India.

The U.S. need make no such proclamation. With high productivity, low energy prices and sophisticated leadership, the United States continues to lead the world in manufacturing output. While India, China and most of Europe outside of Germany have struggled in recent years, the U.S. has seized on its advantages and reclaimed the high ground in manufacturing.

Less than a decade ago, there were predictions that the U.S. would become a second-rate manufacturing economy. But when the economy tanked seven years ago, it was U.S. manufacturing (on its own the world's 9th largest economy) that led the way out. The success has burnished the reputation of Made in America.

Now is not the time to rest on that accomplishment. It's time to double down on U.S. manufacturing's role as a world leader.

There's never been a more crucial time to assert that role. Economic growth here and around the world depends on a strong and expanding U.S. economy-not to the exclusion of others, but with the goal of improving more economies.

It is also inescapably true that even with the strength of the U.S. manufacturing sector, four of every five things manufactured in the world are made outside of the U.S. Many of those products, however, are made by U.S. companies, and many of the most prosperous and progressive manufacturing in the U.S. comes from foreign direct investment from companies like BMW and Volkswagen and Toyota.

We need more of both. We need more American manufacturers looking to expand their operations to other countries as a way to grow both economies. At the same time, we must look to aggressively attract more foreign investment as a way to build jobs and economic growth. Doing both is the sign of a true leader. It is what America aspires to: a leadership role in the world. It is what we deliver each day in manufacturing.

World manufacturing is a borderless economy, interconnected and interdependent. The United States has been the economic leader for the last decade. Hannover Messe offers the biggest possible stage to showcase that American manufacturing leadership. We're going to spend the next 18 months telling the story of how that interconnected manufacturing strategy benefits everybody, every day. We're going to highlight manufacturers from the U.S. that have found success with expanded manufacturing, and we're going to showcase the value of foreign direct investment.

We also need to begin to prepare our message for Hannover Messe 2016 next spring. We need to bring a large contingent of manufacturers to Hannover next April to see this spectacle, to learn and to teach and to share. Plus, it's Germany in the spring, and as someone who has been there for many of those in the past decade, it is a great sight to behold. There's also beer, but I don't want to make that the primary selling point. In the past decade, Hannover Messe's 250,000 attendees have heard the manufacturing stories from South Korea and Russia and India and the Netherlands and China. It's time they heard from us, loud and strong.

- Bob Vavra is content manager, Plant Engineering, CFE Media, bvavra@cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me