Manufacturing technology orders up more than 100%

According to the USMTO, manufacturing technology orders totaled more than $450 million in June 2011, which is up 100% from a year ago.

08/09/2011


June U.S. manufacturing technology orders totaled $459.39 million according to AMT - The Association For Manufacturing Technology and AMTDA, the American Machine Tool Distributors’ Association. This total, as reported by companies participating in the USMTO program, was up 15.3% from May and up 91.7% when compared with the total of $239.68 million reported for June 2010. With a year-to-date total of $2,453.78 million, 2011 is up 103.9% compared with 2010.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTO program.

“At this pace, the industry would post orders equal to all of 2010 by the end of August,” said Douglas K. Woods, President of AMT. “Still, industry leaders view the rest of 2011 with cautious optimism given the weakness in parts of the economy illustrated by the Dow’s plunge at the beginning of August. We expect a bump in orders related to customers taking advantage of the current Bonus Depreciation rate before it is reduced in 2012."

The United States Manufacturing Technology Orders (USMTO) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. orders data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology orders provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology orders are also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

At $61.82 million, June manufacturing technology orders in the Northeast Region were down 2.9% when compared with the $63.68 million total for May but up 18.3% when compared with June a year ago. The year-to-date total of $367.33 million is 72.1% more than the comparable figure for 2010.

Southern Region

June manufacturing technology orders in the Southern Region totaled $65.77 million, 18.5% more than May’s $55.49 million and 94.2% more than the June 2010 total. With a year-to-date total of $306.30 million, 2011 is up 64.0% when compared with 2010 at the same time.

Midwest Region

Midwest Region manufacturing technology orders in June stood at $155.39 million, 5.5% more than the May total of $147.24 million and up 114.0% when compared with last June. At $855.13 million, the 2011 year-to-date total is 157.1% more than the comparable figure for 2010.

Central Region

Manufacturing technology orders in the Central Region in June totaled $124.86 million, up 30.8% from May’s $95.48 million and up 126.7% when compared with the June 2010 figure. The $677.66 million year-to-date total is 108.2% higher than the total for the same period in 2010.

Western Region

Western Region manufacturing technology orders totaled $51.55 million in June, 40.7% more than the $36.64 million total for May and 99.2% higher than the tally for June 2010. At $247.35 million, 2011 year-to-date is up 70.5% when compared with last year at the same time.

www.amtonline.org

The Association for Manufacturing Technology

www.amtda.org 

American Machine Tool Distrbutors' Association

www.usmto.com 

United States Manufacturing Technology Orders Report

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me