Manufacturing Summit brings knowledge leaders together

Industry experts on workforce development, asset management, energy efficiency and digital manufacturing will converge on Charleston, SC next month for the 2009 Plant Engineering Manufacturing Summit. The 2009 Manufacturing Summit will be held March 29-31 at the Charleston Place Hotel in Charleston, SC.

02/01/2009


Industry experts on workforce development, asset management, energy efficiency and digital manufacturing will converge on Charleston, SC next month for the 2009 Plant Engineering Manufacturing Summit. The 2009 Manufacturing Summit will be held March 29-31 at the Charleston Place Hotel in Charleston, SC. IBM is the Platinum sponsor of the 2009 Summit; Life Cycle Engineering and Schneider Electric are Gold sponsors; and Infor has now joined the Summit as a Silver sponsor.

“We write each day about the challenges facing manufacturing,” said editor Bob Vavra. “Our solution, as the Manufacturing Summit schedule indicates, is to meet those challenges head on with practical solutions that can be implemented in a manufacturing facility today. The small investment of time and money at this year’s Summit will pay huge dividends down the road for our readers.

Speakers for this year’s Manufacturing Summit include:

  • Monday, March 30, 9 a.m.: The Digital Plant, with Robert Shear of Autodesk

  • Monday, March 30, 11 a.m.: Energy and Sustainability, with Darren Wikoff of Life Cycle Engineering, Rod Ellsworth of Infor and Mary Bunzel of IBM

  • Monday, March 30, 1:30 p.m.: Workforce Development, with Elaine Seat of the University of Tennessee, Bill Wilder of Life Cycle Engineering and Eric Luyer of IBM

  • Tuesday, March 31 at 10 a.m.: Enterprise Asset Management, with Mary Bunzel of IBM and Mike Poland of Life Cycle Engineering.

    • The Summit opens on Sunday, March 29 with an afternoon of golf and historic tours of Charleston. A cocktail reception will greet Summit attendees on Sunday evening at the historic Charleston Place hotel, selected by Travel + Leisure magazine as one of the Top 50 hotels in the U.S.

      At 6 p.m. on Monday, March 30, a cocktail reception kicks off the 2008 Product of the Year award dinner. This event will honor the top 50 new products, as selected by Plant Engineering readers, and will culminate with the presentation of the Grand Award. U.S. Sen. Lindsay Graham (R-SC) is the invited keynote speaker.

      On Tuesday, March 31, a 9 a.m. breakfast meeting will present the 2008 Top Plant winners, with presentations from Schneider Electric of Columbia, SC and Quality Float Works of Schaumburg, IL. The Manufacturing Summit will conclude with an afternoon tour of Alcoa’s Mt. Holly, SC plant, with a look at how one plant maintains a competitive edge in one of the world’s most competitive industries.

      The $395 registration fee for the Summit covers all meals and events except the Sunday recreation events and hotel fees.

      Reservations can be obtained at the Manufacturing Summit Website at www.plantengineering.com/Summit , or contact Susan Beck at (630) 288-8494 or at SBeck@reedbusiness.com .



      Lean maintenance Webcast is March 5

      Plant Engineering and Infor will present a discussion of ways you can use Lean maintenance strategies and Enterprise Asset Management to drive waste out of your manufacturing operation.

      The Webcast, “Lean Manufacturing: 5 steps to Implement Lean Maintenance” will be March 5 at 1 p.m. CST. Registration for the Webcast is now open at

      Milt Slagowski will provide practical advice based on his experiences at HJ Heinz, as well as an overview of the tools and process that help reduce specific maintenance waste items %%MDASSML%% and achieve Lean maintenance.

      Among the topics to be covered are:

      The elements of maintenance waste and the 5 steps to implement Lean maintenance

      How to identify maintenance waste elements and achieve efficiency improvement into the world of production equipment

      How Enterprise Asset Management can help in reduction of waste.

      “Lean manufacturing is all about driving waste out of your manufacturing processes,” said managing editor Jack Smith. “Any plant intending to start out on the journey toward Lean manufacturing must face the reality that waste steals efficiency and productivity from the manufacturing process. Lean maintenance is key; Enterprise Asset Management ties maintenance and manufacturing together.”

      The “Lean Manufacturing: 5 steps to Implement Lean Maintenance” Webcast is hosted by Plant Engineering



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me