Manufacturing's true leaders aren't waiting

As the world comes to Chicago in September for the 2012 International Manufacturing Technology Show, America has suddenly rediscovered manufacturing as a source of pride and admiration.

08/13/2012


As the world comes to Chicago in September for the 2012 International Manufacturing Technology Show (IMTS), America has suddenly rediscovered manufacturing as a source of pride and admiration.

Not that manufacturing went anywhere, of course. But as our industry has led the U.S. economy in its halting steps out of recession, it also has done so with a commitment to improving not just what we make, but how we make it. At a time when corporate leaders are sitting on piles of cash and the White House and Congress are sitting on their hands, manufacturing has charged forward.

In our world, we now live on minute-to-minute news cycles and an emphasis on speed and volume rather than accuracy and craftsmanship. News, as it turns out, is now manufactured in much the same way as the high-volume, low-quality products that triggered the whole outsourcing hysteria of the past few years. U.S. manufacturing, as it turns out, is winning the admiration of the globe today because it wouldn’t abandon the concept of accuracy and craftsmanship.

Consumers ultimately reject sloppy products, whether it’s a new car or a news story. American manufacturers took the opportunity to stake out the high ground on quality, and that effort has paid off. Not only are American products sought again, but foreign investors are bringing their jobs to the U.S. They want high-quality products produced by skilled workers. They have a choice on where to invest their money. They have chosen the U.S. worker in increasing numbers.

Even with this reality, though, the world of manufacturing continues to evolve. The borders of nations are more blurred than ever. Manufacturing is not just a national issue but a global one, dependent on a changing global economic landscape. The old expression, “If America sneezes, the world catches cold” is no longer strictly true. China’s sluggish growth, the eurozone’s continuing issues, and political instability in the Middle East have led us all to reach for the tissue box over the past year.

As the world comes to Chicago for IMTS in September, that’s all the more reason to understand manufacturing in a global context, not just as it applies to the U.S. Too many worry about whether jobs are insourced or outsourced; what’s really important is how U.S. manufacturers can figure out what their true market could be, and then deliver products that meet the market’s needs.

Some have chosen to wait until after the U.S. elections this November to make any further moves into the global market. There is a legitimate debate about what shape federal tax policy might take, but the real issues facing manufacturers don’t need government involvement. In fact, those who would argue we need less government seem to be the ones waiting for government to do something before taking action themselves. That seems especially counterintuitive. It certainly seems unprofitable.

The ones who are venturing out to look for new markets, or the ones venturing out to attract new investors in the U.S., or—as we highlight this month—the ones who are placing a bet on the workers and the markets by expanding their plants and their product lines in the U.S. and around the globe are the ones reaping the benefits. They’re not waiting around.

New products are coming into the marketplace from those who aren’t content to wait. New plants are going up around the country. New investments are made each day in the manufacturing infrastructure. The companies we highlighted in this issue all have one thing in common: They believe in their workers above all else.

If you can’t say the same thing, then you need new workers. If you have faith in your people and your process and your future, then you need to come to Chicago in September and participate at IMTS. See what in the world is going on.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me