Manufacturing output growth continues to slow

Industrial production growth has slowed in recent months -- further evidence that the overall U.S. economy didn't expand at nearly the rate in the second quarter of the year that it did during the first three months of 1998.

09/01/1998


Industrial production growth has slowed in recent months -- further evidence that the overall U.S. economy didn't expand at nearly the rate in the second quarter of the year that it did during the first three months of 1998. During June, overall industrial production declined 0.6%, following a revised gain of 0.3% in May.

Ongoing strikes, which sharply curtailed the output of motor vehicles and parts, accounted for just about all of the June drop in industrial production. Industrial production specifically for the manufacturing sector also recorded a 0.6% decline from May to June. This was largely attributable to the 11% decline in production of motor vehicles and parts. However, there was weakness evident in other industries within the durable goods sector as well. Output was unchanged, in aggregate, for the nondurable goods subsector, with gains in chemicals and petroleum products being offset by declines in other industries including foods, apparel, and paper.

For the second quarter of this year, manufacturing production decelerated from a 2.3% rate of increase in the first quarter of 1998 to a 1.7% rate of output growth. Production gains for the first half of this year were well below the increases registered during the second half of 1997. Industrial production rose at a 6.1% seasonally adjusted annualized rate during the third quarter of last year, and by a whopping 8.1% rate during the October-December period.

The much more moderate growth rates achieved during the first six months of 1998 show that the Asian economic crisis, and its associated ramifications, are already having a discernible impact on the manufacturing sector of the U.S. economy. Orders growth has slowed, with total manufacturers orders declining by 1.6% between April and May.

Manufacturing employment has also moved somewhat slower during the past several months, registering a decline of 0.3% between March and June. Although June 1998 manufacturing employment was up 0.7% from the same month last year, this pales when compared to the 2.6% gain in total U.S. employment during the same 12-mo period. And total hours worked (the product of number of workers and the average workweek) have fallen from their peak of late 1997. Perhaps most significantly, given its value as a leading indicator of trends within the industrial sector, the NAPM composite index fell below the 50 level during June for the first time in 23 months.

Manufacturing output during June 1998 was 3.8% above its June 1997 level. Naturally, some industries fared better than others did. Sectors that saw production trends significantly trail the manufacturing average included: shoes (-9.3%), apparel (-3.3%), steel (+0.3%), paper (+0.4%), and instruments (+1.6%). Among the many industries for which output in June of this year was much higher than in June 1997 were: computers (+46.8%), electrical and electronic equipment (+13.2%), industrial machinery (+12.7%), and aircraft production (+9.1%).

Given the orders trend of the past several months, we'd expect to see overall manufacturing production growth stagnate, or perhaps decelerate a bit more, during the third quarter. However, there's still no sign that the momentum of the electronics and business equipment sectors have slowed significantly, and we expect near-double-digit output growth to continue at least into the fall of this year.

Industrial production index

Annual change, %

May 1998 Actual 1997 1998* 1999*

Paper 113.2 4.6 1.3 2.3

Chemicals 118.2 4.4 2.1 2.9

Petroleum 113.7 2.8 2.9 3.3

Plastics 129.7 3.2 3.4 3.6

Stone/clay/glass 121.7 5.2 2 4.8

Metals 126.4 4.7 3.5 4.5

* Forecasts

Industrial Production Index: 1992=100, seasonally adjusted.

Source: Federal Reserve Board.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me