Manufacturing most attacked industry

Manufacturing was the most attacked industry last year, according to a recent report by Symantec.

04/22/2013


ISS SourceWhile manufacturers over the years have delayed or put off various levels of defense in depth measures, a new report by security company Symantec just backs up the idea the industry is under attack.

Manufacturing leads the pack as being the most attacked industry at 24%, the Symantec report said. Manufacturing ended up followed by finance, insurance and real estate companies at 19% and by non-traditional services at 17%, Symantec said.

Meanwhile, small businesses are under the targeted eye of cyber criminals these days because, simply put, they are easy pickings due to their less sophisticated defenses, the report said.

It only makes sense because big businesses can afford to spend money on a strong defense in depth program, but the small guys have a more difficult time protecting the crown jewels.

Companies with 250 employees or less absorbed 18% of targeted cyber attacks in 2011, but the figure jumped to 31% in 2012, said Symantec in its Internet Security Threat Report 2013, released Tuesday.

“While it can be argued that the rewards of attacking a small business are less than what can be gained from a large enterprise, this is more than compensated by the fact that many small companies are typically less careful in their cyber defenses,” the report said.

Organizations between 251 employees to 2,500 ended up targeted 19% of the time, with companies with more than 2,500 employees making up the remaining 50%, Symantec said. The company said it detected a 42% increase overall in cyber attacks in 2012 compared to 2011.

Employees in research and development and sales functions are prime targets for hackers, and Symantec said it saw a large increase in attacks directed at those roles.

“This suggests that attackers are casting a wider net and targeting less senior positions below the executive level in order to gain access to companies,” the report said.

The websites of small businesses also prove attractive to criminals to plant malicious software in order to gain a foothold in other companies. If a user visits a hacked website, the person’s web browser will undergo probing for software vulnerabilities. The method of using a company’s website as bait is a “watering hole” attack, Symantec said.

“For example, an attacker may infiltrate a small supplier in order to use it as a spring board into a larger company,” Symantec said.

Small businesses may have less cash on hand for hackers to steal, but the companies may have other data, such as customer information or intellectual property, which hacker may value more than money.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me