Manufacturing index rises, but remains in contraction overall

The Purchasing Manufacturers' Index (PMI) rose for the second straight month to 49.5% as the overall economic outlook remains more positive than it had been in previous months.

03/04/2016


The Purchasing Manufacturers' Index (PMI) rose for the second straight month to 49.5% as the overall economic outlook remains more positive than it had been in previous months. Image courtesy: CFE MediaWhile the monthly Purchasing Manufacturers' Index (PMI) from the Institute for Supply Management (ISM) remained in contraction for the fifth consecutive month in February, there were small signs that the decline in the manufacturing sector may be easing.

New orders were up and production improved in February as the PMI rose to 49.5%, an increase of 1.3 percentage points from January. Bradley Holcomb, chairman of the Institute for Supply management's Manufacturing Business Survey Committee, said there was more optimism last month.

"Comments from the panel indicate a more positive view of demand than in January, as 12 of our 18 industries report an increase in new orders, while four industries report a decrease in new orders," said Holcomb in a press release.

The PMI for February was above the 49.4% level in October 2015, which was the first month the index had been in decline for three years. After hitting 48.0% in December 2015, the PMI has been on the rise in the last two months.

The New Orders Index was at 51.5%, the same reading as in January, and the Production Index rose 2.6 percentage points to 52.8%. Another good sign is that raw material prices remained low, sitting at 38.5%. It was the 16th straight month prices remained below the growth threshold.

Among the comments from committee members:

  • "Low oil prices and reduced activity continue affecting our business." (Petroleum & Coal Products)
  • "U.S. business demand is solid; international demand is soft." (Chemical Products)
  • "Mobility spend is up." (Computer & Electronic Products)
  • "Business has to get better. And it appears it is. Healthy backlog for 2016." (Fabricated Metal Products)
  • "Very strong demand for product. Material availability very good and commodity pricing continues to be depressed." (Machinery)
  • "Market is beginning to trend up with spring season on its way." (Wood Products)
  • "Not seeing impact from global economic volatility or oil prices. Business is strong and growth projections remain the same." (Miscellaneous Manufacturing)
  • "Orders are coming in stronger than expected." (Furniture & Related Products)

Bob Vavra is content manager, Plant Engineering, CFE Media, bvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me